Electrical fitter kip i. Automation instrumentation engineer
If you are considering other options (besides employment as a mechanic), then do not limit yourself to this selection of ads, in our many other positions for different positions. There you can also use the search for offers of direct employers and agencies.
Salary: from 43,000 rubles. per month
Applicant requirements:
Applicant requirements:
Experience - driver's license category B - responsibility, without a / p
Salary: from 45,000 to 55,000 rubles. per month
Applicant requirements:
4-5 category
Salary: from 60,000 rubles. per month
Applicant requirements:
Knowledge of devices, principle of operation and methods of adjustment of repaired and adjusted complex devices, mechanisms, devices; purpose and methods of adjustment of control and measuring and control and adjustment instruments; methods of adjustment and calibration of instruments and apparatus and rules for taking characteristics during their testing; rules for calculating resistances; schemes of complex connections; designations of thermal and electrical circuits and drawings; fundamentals of mechanics and electronics in the scope of the work performed. It is preferable to live in the Naro-Fominsk region. Emergency exits are possible, in case of production need, after hours. Having your own transport is welcome.
Applicant requirements:
Specialized secondary education Experience from 1 year Electrical safety group III up to 1000 V Knowledge of the basics of electrical engineering Knowledge of the basics of mechanics Knowledge of frequency converters, sensors, controllers Ability to read electrical circuits (power, electronic, pneumatic, hydraulic) Honesty, stress resistance, desire to work
Salary: by agreement.
Applicant requirements:
At least one year of work experience as an instrumentation mechanic, instrumentation adjuster, or instrumentation engineer - Technical education in the specialty "Automation of technological processes and production" - Knowledge of the basics of electronics, electrical engineering - Ability to read technical documentation, electrical diagrams, knowledge of SB and ESD circuits; - Good knowledge of modern technological equipment for instrumentation and automated control systems and process control systems and the principles of its operation - Electrical safety approval group not lower than 3rd
Applicant requirements:
Experience in a similar position or an electrician for at least 3 years Knowledge of refrigeration and compressor equipment Skills in working with electrical circuits and circuits with automation elements Education is not lower than secondary professional Availability of IV electrical safety group PC user, skills in 1C will be an advantage
Salary: by agreement.
Applicant requirements:
Education: secondary, secondary technical; Special knowledge: mechanical technician, instrumentation fitter, PC knowledge is welcome; Work experience in the specialty: 1 year; Required licenses / rights: electrical safety group - III, up to 1000V (as an advantage)
Applicant requirements:
Applicant requirements:
Higher education. At least five years of work experience in a similar position confirmed by a work book. Responsibility, attention to detail, punctuality...
Salary: up to 34,000 rubles. per month
Applicant requirements:
Secondary specialized education; - Necessarily! availability of an electrical safety certificate (III up to 1000 V and above); - Experience from 1 year; - Ability to read electrical circuits (power, radio-electronic); - Stress tolerance, willingness to work.
Salary: up to 19663 rubles. per month
Applicant requirements:
Applicant requirements:
Salary: from 56,000 rubles. per month
Applicant requirements:
Education: not lower than secondary special (technical) work experience from 1 year
Salary: from 60,000 rubles. per month
Applicant requirements:
Average professional education(technical) Work experience in a similar position for at least 5 years Knowledge of methods for detecting and eliminating defects Methods for repair, adjustment, installation, testing, adjustment of heat measuring and electronic equipment for forging and pressing shop equipment Ability to program thermal equipment on devices different kind(VARTA. ARIES. RMT. Metacon, etc.) Ability to read wiring diagrams Experience in checking electrical parameters of controlled equipment using PC instrumentation - confident user Driver's license for the right to drive an electric forklift Certificate for the right to work with lifting mechanisms - desirable. Attention, diligence, diligence
Applicant requirements:
Average technical education
Salary: from 38,000 rubles. per month
Applicant requirements:
Operator of a gas, steam boiler house with the right to service gasified steam and hot water boilers with a steam pressure of more than 0.7 kgf / cm 3 and a water temperature of more than 115 C (boilers DKVR 3.5 / 13, with automatic safety control), a steam-water heat exchanger. It is also the responsibility of the operator to monitor the level and temperature of the water in the deaerator, the pressure and temperature of the coolant in the heating main.
Salary: from 63,000 to 70,000 rubles. per month
Applicant requirements:
Higher education (economic, financial); Confident PC user (Excel (pivot tables), 1C Enterprise 8.3); Knowledge of the basic principles of accounting and management accounting; Knowledge of budgeting principles Knowledge of budgeting methods Responsibility, attentiveness, tolerance for routine, consistency, communication skills, stress resistance. Confident PC user (Excel, Word, 1C Enterprise 8.2).
Salary: up to 40,000 rubles. per month
Applicant requirements:
Experience in a similar industry; Electrical safety tolerance group not lower than 3rd
Salary: from 50,000 rubles. per month
Applicant requirements:
Readiness for traveling work, fixing in one of the districts of the East Administrative District, Work experience from 2 years
Salary: from 50,000 rubles. per month
Applicant requirements:
At least 3 years of experience in a similar position
Salary: from 51700 rubles. per month
Applicant requirements:
Secondary technical education, (electrotechnical, automation, instrumentation and A); Experience in maintenance of building control and automation systems; Experience in the operation of industrial refrigeration machines, climatic equipment; ventilation and heating systems, water supply and sewerage systems; Electrical knowledge, general knowledge of electronics, general knowledge of mechanics; Experience in installation, adjustment of equipment, commissioning of instrumentation and A; Experience in electrical installation (laying cables, connecting electrical equipment, ability to work with measuring instruments).
Salary: from 35,000 to 40,000 rubles. per month
Applicant requirements:
Mandatory presence of the 3rd electrical safety group; - Knowledge of the structure of ventilation systems, coolers, frequency control systems of electric motors; - Knowledge and observance of the regulations for preventive maintenance; - Knowledge of the basics of electrical engineering, the device and the principle of operation of instrumentation; - Knowledge of the basics of electronics and radio engineering; - Ability to read electrical diagrams; - Ability to work with controllers and control units.
Salary: by agreement.
Applicant requirements:
Knowledge of electrical engineering, electronics, design and principles of operation of technological equipment, methods of setting up serviced equipment, the ability to read schematic diagrams of low-voltage systems, the ability to work with devices, automation tools.
Salary: from 35,000 rubles. per month
Applicant requirements:
Knowledge of automation controllers is a plus. Maintenance, repair and metrological control skills from 3 years. Ability to read technical documentation and electrical schematics. At least 3 years of experience as an Instrumentation Mechanic or Instrumentation Adjuster. Confident PC user. Monitoring and control of W&C parameters in the control room
Salary: by agreement.
Applicant requirements:
The presence of an electrical safety group of at least 3 to 1000 V; Ability to read and draw up electrical diagrams Knowledge of the principles of operation and rules for the operation of instrumentation and control equipment; Experience in manufacturing companies; Professional attitude to work; 4-6 category
Salary: up to 36,000 rubles. per month
Applicant requirements:
Knowledge of electrical engineering and electronics. - device, principles of operation of technological equipment. - methods of setting up serviced equipment. - methods and methods of electrical, mechanical and complex adjustment. - PTE and PTB in the scope of qualification group 3. - Knowledge in the field of automation, the ability to read circuit diagrams, the ability to work with sensors, measuring instruments, automation equipment
Salary: up to 55,000 rubles. per month
Applicant requirements:
Education not lower than secondary professional (radio electronics, automated control systems); at least three years of experience in industrial enterprises; knowledge of schemes of simple specialized adjusting installations; knowledge of the basic properties of conductive and insulating materials; knowledge of the influence of temperatures on measurement accuracy; understanding of the basics of electrical engineering in the scope of work performed.
Salary: up to 48,000 rubles. per month
Applicant requirements:
Knowledge and experience in the maintenance and repair of electronics and automation. Windows, MS Office. Knowledge of instrumentation and electronic equipment Technical education. Experience in the specialty from 1 year.
Salary: from 60,000 rubles. per month
Applicant requirements:
Experience in instrumentation and control in manufacturing.
Salary: by agreement.
Salary: from 45,000 rubles. per month
Applicant requirements:
Work experience from 3 years. TK entry. 3-6 category. The electrical safety tolerance group is not lower than the 3rd.
Salary: by agreement.
Applicant requirements:
Education: higher, technical (special). Work experience is required.
Applicant requirements:
Technical education in the specialty "Automation of technological processes and production" or "Automated control systems"; At least 1 year of experience in production as an instrumentation fitter, instrumentation adjuster or instrumentation engineer; Basic knowledge of electronics and electrical engineering; Good knowledge of modern technological equipment for instrumentation and automated control systems and the principles of its operation, ability to work with HART-communicators, calibrators; Ability to read technical documentation, electrical diagrams, knowledge of SB and ESD diagrams; Basic skills in working with Excel, Word, Outlook; welcome knowledge of English language(a basic level of).
Salary: from 55,000 rubles. per month
Applicant requirements:
Education not lower than secondary special. 1 year experience in a similar position. Knowledge of electrical and automation. Responsibility, stress resistance.
Salary: by agreement.
Applicant requirements:
Higher education (technical). - Experience is welcome. - Knowledge of equipment operation principles.
Salary: up to 30,000 rubles. per month
Applicant requirements:
Experience from 2 years and specialized secondary education Knowledge in the field of automation, the ability to read circuit diagrams, the ability to work with sensors, measuring instruments and automation equipment. Basic knowledge PC.
Salary: by agreement.
Applicant requirements:
Salary: up to 70,000 rubles. per month
Applicant requirements:
Work experience from 3 years. The ability to quickly understand the documentation, punctuality, honesty, the ability to bring the matter to the end.
Salary: by agreement.
Applicant requirements:
Experience in food production in setting up and operating automatic packaging lines and modern marking equipment; - Knowledge of modern electronics (optical sensors, level and temperature sensors, flow meters, frequency converters), electro-pneumatic automation (pneumatic islands, electro-pneumatic distributors, pneumatic actuators). - Good knowledge of modern marking equipment and ink jet printers. - Basic knowledge of Omron, Siemens controllers.
Salary: from 42,000 rubles. per month
Applicant requirements:
Experience in a similar industry; - electrical safety tolerance group not lower than 3rd.
Salary: from 40,000 rubles. per month
Applicant requirements:
Experience with automation supply and exhaust ventilation minimum 3 years. Ability to read blueprints and electrical diagrams. Knowledge of ventilation systems.
Salary: by agreement.
Applicant requirements:
Secondary vocational education; 3 years experience in a similar position; Electrical safety group not lower than 3; Knowledge of the basics of central heating automation; Knowledge of the main types of instrumentation and automation used in TP; Ability to read automation diagrams; Ability to carry out installation, dismantling, adjustment of instrumentation.
Applicant requirements:
profile education. Work experience from 3 years. The ability to quickly understand the documentation, punctuality, honesty, the ability to bring the matter to the end. Orion PRO - knowledge is a plus, but not a criterion. The ability to quickly understand technical documentation, a high level of responsibility, punctuality, honesty, the ability to bring things to the end.
Salary: from 40,000 to 100,000 rubles. per month
Applicant requirements:
Knowledge of the operation algorithm of boilers, control automation and safety of boiler equipment. Understand technical documentation. Knowledge of fire and security alarms preferred. Having a car.
Salary: from 50,000 rubles. per month
Applicant requirements:
One year experience in a similar position. Secondary special / higher education. Experience in servicing ITP, TsTP, KUUTE, VNS. Knowledge of controllers MZTA, Kontar. Rights category "B".
Salary: from 40,000 rubles. per month
Applicant requirements.
Unified Tariff and Qualification Directory of Works and Professions of Workers (ETKS), 2019
Part No. 2 of issue No. 2 ETKS
The issue is approved by the Decree of the Ministry of Labor of the Russian Federation of November 15, 1999 N 45
(as amended by the Order of the Ministry of Health and Social Development of the Russian Federation of November 13, 2008 N 645)
Locksmith for instrumentation and automation
§ 92. Locksmith for instrumentation and automation of the 2nd category
Characteristics, works. Repair, adjustment, testing and commissioning of simple, magnetoelectric, electromagnetic, optical-mechanical and heat measuring instruments and mechanisms. Locksmith processing of parts according to 12 - 14 qualifications. Determining the causes and troubleshooting of simple devices. Installation of simple wiring diagrams. Winding springs from wire in a cold state, protective lubrication of parts. Repair of devices of medium complexity under the guidance of a more highly qualified locksmith.
Must know: device, purpose and principle of operation of repaired devices, mechanisms; schemes of simple special adjusting installations; basic properties of conductive and insulating materials and methods for measuring resistance in various links of the circuit; purpose and rules for the use of the most common universal and special devices and instrumentation; system of admissions and landings; quality and roughness parameters; grades and types of anti-corrosion oils and lubricants; name and marking of processed materials; fundamentals of electrical engineering in the scope of the work performed.
Work examples
1. Ammeters, voltmeters, pressure gauges, galvanometers - medium repair and adjustment.
2. Carriage scales - processing of various parts.
3. Commercial scales, mobile and stationary (mortise) - replacement and repair of platform flooring and weight holders.
4. Weights trade and conditional - repair and delivery under branding.
5. Details simple to devices - metalwork with threading in through holes.
6. Frames for transformers - manufacturing.
7. Gear wheels with a futor - picking.
8. Cinema and cameras - change of eyepieces, locks, caps, repair of frame counters.
9. Magnetic contactors and starters - medium repair.
10. Technical pressure gauges - assembly.
11. Millivoltmeters - medium repair, verification and delivery after testing.
12. Relay base - template assembly.
13. Instruments - setting to mechanical zero.
14. Trailers, binoculars, spotting scopes - repair and adjustment.
15. Piezoacoustic transducers, electromagnetic sensors - medium repair.
16. Copper conductors for resistances - billet.
17. Regulators, distributors and large relays - repair.
18. Copper and platinum resistance thermometers - assembly and calibration.
19. Contact thermocouples - assembly and adjustment.
20. Clamps of complex configuration - manufacturing.
21. Gears, bushings, mounting rings and other parts - pinning on rollers, drilling and reaming holes for pins.
§ 93. Locksmith for instrumentation and automation of the 3rd category
Job Description. Repair, assembly, inspection, adjustment, testing, alignment, installation and delivery of heat-measuring, electromagnetic, electrodynamic, counting, optical-mechanical, pyrometric, automatic, self-recording and other devices of medium complexity with the removal of circuits. Locksmith processing of parts according to 11 - 12 qualifications with fitting and fine-tuning of parts. Drawing up and installation of schemes of connections of average complexity. Instrument coloring. Soldering with various solders (copper, silver, etc.). Heat treatment of parts with their subsequent fine-tuning. Determination of metal hardness with calibrated files. Repair, adjustment and adjustment of particularly complex instruments and apparatus under the guidance of a more highly qualified locksmith.
Must know: device, purpose and principle of operation of repaired and adjusted instruments and devices; state standards for testing and commissioning of individual instruments, mechanisms and devices; basic properties of metals, alloys and other materials used in repairs; electrical properties of conductive and insulating materials; methods of heat treatment of parts with subsequent finishing; influence of temperatures on measurement accuracy; symbols of shut-off, control safety valves in thermal schemes; rules for installing narrowing devices; types of laying impulse pipelines; installation of leveling and separation vessels; system of tolerances and landings, qualifications and roughness parameters.
Work examples
1. Ammeters, voltmeters, galvanometers, millivoltmeters, pressure gauges, electric meters, gearboxes - overhaul and adjustment.
2. Adding machines and typewriters of all systems - current and medium repairs.
3. Barometers - aneroids - repair and adjustment.
4. Technical scales - repair.
5. Commercial and automobile scales with a rocker indicating device - current and medium repairs, checking hardened steel parts of the scales, bending, grinding prisms, pillows and earrings.
6. Working weights - check on control scales.
7. Hydraulic sensors - pressure testing, repair.
8. Piezoacoustic sensors - overhaul, adjustment.
9. Details simple to devices - threading in blind holes.
10. Cinema and cameras - complete disassembly of shutters, repair of self-timers, setting lenses to focus, correcting apertures, adjusting pick-up coils.
11. Rings, ball holders - manufacturing.
12. Sorting magnets - production with installation on the machine.
13. Tubular pressure gauges - repair.
14. Micrometers with a division value of 0.01 mm - disassembly, fine-tuning of the microscrew, heel planes, nuts, as well as assembly and verification by plane-parallel end measures and interference glasses.
15. Potentiometers - disassembly, cleaning, assembly of the kinematic circuit.
16. Devices for electrical, electromagnetic and electrodynamic systems - overhaul.
17. Prisms - fine-tuning after hardening of simple guides.
18. Flow meters, time relays, mechanical float mechanisms - repair and adjustment.
19. Stereo distance meters, commander's pipes - repair and adjustment.
20. Tachometers - repair.
21. Thermocouples - installation.
22. Traction and pressure gauges - repair.
23. Electric chains - continuity.
§ 94. Locksmith for instrumentation and automation of the 4th category
Job Description. Repair, adjustment, testing, adjustment, installation and commissioning of complex electromagnetic, electrodynamic, heat-measuring, optical-mechanical, counting, automatic, pyrotechnic and other devices with fitting and fine-tuning of parts and assemblies. Adjustment and adjustment of the device of relay protection, electroautomatics, telemechanics. Determination of defects of repaired devices and elimination of them. Locksmith processing of parts according to 7 - 10 qualifications and assembly of gear and worm gears. Drawing up and installation of complex schemes of connections. Calculation of the absolute and relative error in the verification and testing of devices. Drawing up defective statements and filling out passports and certificates for devices and machines.
Must know: device, principle of operation and methods of adjustment of repaired and adjusted complex devices, mechanisms, devices; purpose and methods of adjustment of control and measuring and control and adjustment instruments; methods of adjustment and calibration of instruments and apparatus and rules for taking characteristics during their testing; rules for calculating resistances; schemes of complex connections; rules for calculating absolute and relative errors when checking and testing devices; designations of thermal and electrical circuits and drawings; system of admissions and landings; quality and roughness parameters; fundamentals of mechanics and electronics in the scope of the work performed.
2. Film projection equipment - replacement of individual components and parts.
3. Adding machines and typewriters of all systems - overhaul and restoration.
4. Accurate analytical scales - repair, adjustment.
5. Scales bunker elevator - current, average and capital repairs, adjustment and check.
6. Commercial and automobile scales with rocker indicating devices - overhaul.
7. Scales for commercial and automobile scales with a dial indicating device - overhaul, medium and current repairs.
8. Scales mortise commodity mobile and stationary - current, average and capital repairs, installation, adjustment, check.
9. Viewfinders - repair, adjustment.
10. Water meters of all systems and all diameters in wells - installation with switching to other diameters, medium repairs.
11. Rectifiers - revision and repair.
12. Self-recording galvanometers and logometers - disassembly and repair.
13. Cinema and photographic equipment - repair of synchronizers; diaphragms of deceleration mechanisms, rangefinder adjustment.
14. Gear wheels - finishing the keyway with a nozzle on the axle.
15. Magnetic contactors, marine starters - medium repair.
16. Watch mechanisms of all kinds of devices (pressure gauges, traction gauges, etc.) - overhaul with the manufacture of parts and adjustment.
17. Microscopes - repair with fine-tuning of parts and alignment.
18. Pressure gauges and indicators - disassembly, repair, assembly and adjustment.
19. Electric bridges - repair.
20. Horizontal and vertical optimeters - disassembly, repair, assembly and adjustment of quill turbines with the manufacture of caps, springs and tables.
21. Axles with tubes - final processing with fine-tuning.
22. Periscopes - repair and adjustment.
23. Optical and radiation pyrometers - overhaul.
24. Devices of the electromagnetic system - repair with disassembly of the kinematic mechanism and the movable system.
25. Electronic regulating devices - repair.
26. Polarized relay - revision, repair and adjustment.
27. Systems of mobile devices - balancing.
28. Voltage stabilizers - revision and repair.
29. Assembly tables - current repair.
30. Ultrasonic electromagnetic thickness gauges - medium repair.
31. Electric drives of all types - installation and adjustment.
§ 95. Mechanic for instrumentation and automation of the 5th category
Job Description. Repair, adjustment, testing, adjustment, installation, adjustment and commissioning of complex heat-measuring, optical-mechanical, electrodynamic, counting, automatic and other devices with an automatic control unit with a summing mechanism and remote transmission of readings. Identification and elimination of defects in the operation of instruments, manufacture of laboratory instruments. Drawing scales, grids and drawing up complex sketches. Conversion of electrical appliances to other measurement limits. Adjustment and verification of qualifications of all types of thermal and electrical instrumentation, automatic regulators and automatic power supplies.
Must know: design features of repaired complex and precise instruments and methods of their adjustment and alignment; arrangement of precise measuring instruments; causes of defects in the operation of devices and automatic machines, measures to prevent and eliminate them; kinematic diagram of self-recording devices of all types; rules for the repair, verification and adjustment of complex instruments and automata, and rules for the selection of basic surfaces that guarantee the required accuracy.
Work examples
1. Automatic power supply, pressure and temperature - repair, check and adjustment.
4. Film projection equipment - disassembly, repair, assembly, adjustment.
5. Carriage scales, automobile scales with rocker dial and pointing instruments - installation, adjustment, check of racks, platform brackets.
6. Goniometers - repair, check, adjustment.
7. Optical glass parts - fine-tuning.
8. Interferometers - repair, check, adjustment.
9. Cinema and cameras - setting the angle of the mirror, correcting the diaphragm block, the barrier.
10. Depth exemplary pressure gauges and potentiometers - repair with scale recalibration.
11. Self-recording and contact pressure gauges - repair.
12. Measuring machines for measuring lengths - repair, check, adjustment.
13. Processing machines of domestic production - assembling units.
14. Universal microscopes - repair, check, adjustment.
15. Instrumental microscopes - repair of the stroke head of the microscope; repair, assembly and checking of the table for accuracy.
16. Electric and electronic bridges - repair.
17. Precision levels - repair, check, adjustment.
18. Axes of arrows of devices - sharpening and polishing.
19. Automatic gas analysis devices, radioactive ultrasonic and radioactive pneumatic regulators, capacitive signaling devices, system blocks, etc. - repair, assembly and adjustment.
20. Oxygen and pyrometric devices - repair, check, adjustment.
21. Complex optical-mechanical devices of various systems and designs - repair, adjustment and testing.
22. Pointer measuring devices - overhaul with replacement of main parts and assemblies - rewinding of frames, replacement of torque springs with selection of their strength, recalibration of instruments to other measurement limits.
23. Precision instruments (optical pyrometers, analytical, microanalytical balances, etc.) - complete overhaul with a guarantee of service life.
24. Universal devices for checking worm cutters - checking, adjusting.
25. pH meters - repair with complete disassembly and assembly.
26. Flowmeters with a secondary control device - repair.
27. Telecells of the telemechanization system, linear nodes and radio control - repair, assembly, testing and adjustment.
28. One-second theodolites - repair, check, adjustment.
29. Squares and calibration plates, sine rulers - repair and finishing of surfaces.
30. Thermal shields - switching of complex electrical circuits.
31. Eccentrics - finishing the curved surface on the goniometer.
§ 96. Locksmith for instrumentation and automation of the 6th category
Job Description. Repair, adjustment, installation, testing, adjustment, alignment and calibration of experimental, experimental and unique heat-measuring, automatic and electronic equipment of projection and optical systems, radioactive devices, radio station units, direction finders, radar installations. Identification and elimination of defects in the operation of equipment. Determination of the degree of wear of parts and assemblies. Adjustment and comprehensive testing after wiring diagrams for thermal control and automation of boilers, turbines and process equipment. Assembling circuits for testing thermal automation devices.
Must know: device, interaction of complex devices, the technological process of their assembly and methods of adjustment; electrical thermal diagrams of thermal automation devices; device and methods of alignment of complex control and adjustment devices; properties of optical glass, metals and auxiliary materials, conductors, semiconductors used in instrumentation; basics of calculating gears of various gearing profiles and optical systems; fundamentals of physics, mechanics, telemechanics, heat engineering, electrical engineering, metrology, radio engineering and electronics in the amount of work performed.
Requires secondary vocational education.
2. Analyzers of automatic composition of liquids and gases (titrimeters, infrared absorption gas analyzers) - overhaul and adjustment.
3. Film projection devices - adjustment of the Maltese and clamshell systems.
4. Electronic equipment - adjustment.
5. Scales automatic portion - overhaul, installation, adjustment and verification.
6. Scales and weights exemplary - repair, adjustment, verification.
7. Exemplary wagon scales - repair, installation, adjustment and verification.
8. Optical-acoustic gas analyzers - overhaul, adjustment.
9. Rangefinders - repair and adjustment of the optical system.
10. Television meters - repair, check.
11. Cinema and cameras - adjusting shutters, repairing the slowdown mechanism, replacing the rangefinder prism, eliminating backlash in the range camera "Kyiv", "Start", "Change" and repairing the self-timer, eliminating mirror drop, correcting uneven film buckles, setting lenses to focus , cleaning the viewfinder, changing the mirror, adjusting the lens cocking spring.
12. Magnetic oxygen meters - installation and adjustment.
13. Contours of oscillatory telecells of telemechanization systems - repair, adjustment.
14. Comparators - repair, adjustment.
15. Reduction shops, Warren motors - repair and adjustment.
16. Resistance stores - repair.
17. Oscilloscopes - repair.
18. Optical pyrometers, radiation and potentiometers - repair and adjustment.
19. Checkweighing platforms - check.
20. Molds of complex configuration - manufacturing.
21. Salinity alarms - installation, repair, adjustment.
22. Automation schemes for blowing heating surfaces and continuous blowing boilers - repair and adjustment.
23. Wiring and switching diagrams - drawing up according to electrical circuit diagrams.
24. Resistance thermometers - winding the active part and welding the places of separation.
25. Control testers (devices) - repair.
26. Magnetic amplifiers - repair.
27. Selective devices - selection of places, marking and installation according to the concepts of thermal control and auto-regulation.
28. Electronic level gauges - repair and adjustment after installation.
§ 97. Locksmith for instrumentation and automation of the 7th category
Job Description. Repair, maintenance, inspection, testing, installation, adjustment and commissioning of electronic devices based on microprocessors, mini- and micro-computers and terminal devices of the teleprocessing system. Adjustment, adjustment and commissioning of complex systems of instruments and equipment control systems based on microprocessor technology with the performance of restoration and repair work on the elements of these systems, programming controllers, micro- and mini-computers and other equipment and means of electronic computer science ensuring their output to the specified operating parameters. Diagnostics of equipment control systems using special test programs.
Must know: basic principles of building control systems based on microprocessor technology, functional and block diagrams of programmable controllers, micro- and mini-computers; design of microprocessor devices; fundamentals of programming and theory of automated electric drive; ways of introducing technological and test programs; a method for setting up systems in order to obtain the specified static and dynamic characteristics of devices and instruments of converter technology; the arrangement of the main instrumentation and diagnostic equipment, created on the basis of microprocessor technology; methods and organization of building "memory" in control systems.
Requires secondary vocational education.
Work examples
1. Microprocessor "Intelligent" differential pressure gauges, pressure and level sensors - checking, testing, reconfiguration using communicators.
2. Microprocessor-based gas analyzers, moisture, salinity, quality meters - checking, testing, entering programs, changing ranges, determining faults by tests.
§ 98. Locksmith for instrumentation and automation of the 8th category
Job Description. Comprehensive maintenance and adjustment, repair, inspection, testing, installation and commissioning of complex and unique systems of instruments and equipment control systems based on microprocessor technology with the performance of restoration and repair work of these systems, programmable controllers, micro- and mini-computers and other equipment of electronic computing facilities, as well as peripheral equipment. Their diagnosis with the help of test programs and stands with the use of computer technology. Drawing up tests and corrections of technological programs and stands using computer technology.
Must know: ways to build control systems based on microprocessor technology; circuit diagrams of programmable controllers, micro- and mini-computers; ways to correct technological and test programs; organization of a complex of works on adjustment and troubleshooting of devices and systems of computer technology; device and diagnostics of unique measuring and control systems and complexes; theory of automatic control; the main "languages" of programming used in specific technological equipment.
Requires secondary vocational education.
Work examples
1. Microprocessor controllers, regulators - verification, programming, introduction of programs, selection of changes in the characteristics of regulation for each specific control node.
2. Microprocessor logic circuits - adjustment, verification, fault detection by tests.
3. Microprocessor devices with digital inputs and outputs - checking, programming.
4. Microprocessor-based intelligent sensors for pressure, temperature, level sensors - setting, programming, testing, testing using a communicator using the HART or SMART protocol.
5. Microprocessor controllers, vibrometers - adjustment, programming, repair, delivery for testing.
6. Microprocessor-based level gauges, recorders, paperless recorders (based on a micro-computer), microprocessor-based gas analyzers, pH meters, humidity and temperature meters - connection to a PC, configuration, programming, adjustment, testing, delivery for verification.
Any modern enterprise engaged in production activities necessarily uses certain instruments and sensors. Ordinary citizens also need them, because with their help it is possible to control the consumption of water, heat and electricity. At the same time, there are specialists who are engaged in ensuring the normal operation of all these devices.
Definition of instrumentation and varieties
The main purpose of instrumentation and automation, which include special measuring devices and automation, is to determine the exact physical quantities. With the help of these devices, you can get an idea of the current water consumption, determine how efficiently this equipment is functioning, etc.
What is KIPA?
Types of instrumentation
The basis of instrumentation is formed by a wide variety of instruments and devices that are often used in various fields. it there can be both household devices and mechanisms that have become widespread in the construction industry, heavy industry. Moreover, within each direction, separate subgroups of control and measuring devices are distinguished.
Electric meters, ammeters and voltmeters have become widespread for monitoring power consumption. These devices are different type, which affects the objects at which they are used: in the residential, industrial sector or in the public sector. Most often, the installation of these devices is carried out by specialists. For this reason, these Instrumentation and control devices must have exceptional characteristics in terms of quality and measurement accuracy.
A special group of instrumentation is formed by instruments used to measure pressure. These should be considered various models of pressure gauges, vacuum gauges, pressure gauges, etc. These devices have become widespread in various fields, which include industry, boiler systems, and oil refining.
It should also be mentioned about control and measuring devices, with which the volume of bulk solids and liquids is measured. In addition to them, there are other subgroups of instrumentation, which include devices used to determine switching costs, protection devices, etc.
Although there are quite a lot of these devices, thermostats, automatic drives, and frequency converters are most often used.
As already mentioned, the main the purpose of instrumentation is to measure certain quantities. This data is obtained, focusing on the scale and pointer. They can be classified into two types: unilateral and bilateral. With one-sided instruments, the scale is arranged so that its values start from the left side, and the received data is limited to one direction. As for bilateral devices, here the place is reserved for the zero mark strictly in the center. The measurement values can be on the right or left side of the central axis.
What does an instrumentation fitter do?
The main duties of a Kipovian specialist are related to the repair of various electronic metering and control devices. These employees must also be electricians, as in the process of work they have to put into practice the laws of physics. After all, often only an instrumentation engineer is able to help start production.
Where do instrument experts come from?
The staff of the instrumentation and control department is formed only from those specialists who not only have a specialized education, but also have experience. Such an employee can easily read the data of control and measuring devices of any enterprise and get an idea about the nature of the use of electricity. But when one device fails, it leads to serious problems, including the temporary cessation of the entire enterprise.
If a young person chose a field related to instrumentation and automation when entering college, then upon graduation he has the opportunity to find a job in any of the industries. Today, automated systems can be found in railway facilities, refineries, heavy machinery, and those that manufacture food.
The professionalism of the I&C department often decides How long will it take to restore the operation of the enterprise after an emergency. These workers monitor the condition of pumps, conveyors, electric motors, ensuring their smooth operation.
What can the department of instrumentation and control
Employees of the instrumentation and control service are called upon to implement modern technologies at the enterprise. They can easily understand various complex schemes, troubleshoot any system. Their work is based on the implementation of operations that relate to the following areas:
- Automation of electric drives;
- Creation of ACS software for employees working with systems;
- Technology automation.
The instrumentation service is obliged to carry out maintenance and monitor the operation of control devices and systems. These specialists know all the nuances of the functioning of the devices under their control. Besides it is not difficult for them to restore the operation of any sensor and meter.
Who is the chief specialist in the department
It is very important for any enterprise that the department that responsible for debugging, configuring and launching monitoring and control systems represented by a highly experienced professional. In order to effectively cope with the duties of an instrumentation and control engineer, a specialist is required to know the main principles of cybernetics and computer technology, be able to apply methods and control tools, and have a clear idea of functional and production units.
This specialist is required to perform the following functions:
- Development and use of automated control systems for computer technology, carried out with the help of high-tech means of communication and communications.
- Gathering the necessary information, on the basis of which working and technical projects will be created.
- Definition of tasks for employees of the instrumentation and automation service, an explanation of all the nuances specified in the job descriptions;
- Creation of technological schemes that determine the work of the automated control system, in accordance with the requirements of the organizational and technical support of all subsystems.
- Development of technical documentation, instructions and manuals, which outline the points related to working with management information systems.
It is very important for any enterprise to have automatic measuring devices that will take over part of the work. And the instrumentation and control services do an excellent job with their functions, as their staff is made up of qualified specialists who are able to maintain the uninterrupted operation of the key systems of the enterprise for a long time.
Getting to modern large enterprises, you can immediately notice a large number of different sensors, measuring devices, control equipment and other automatic equipment. It is thanks to these devices that operators can receive timely information about how the technological process is proceeding. Regardless of what kind of production the company is engaged in, everywhere there is automatic equipment, the repair of which should be carried out by an instrumentation and control mechanic. What is it - a device for measuring the required chipboard in the production of furniture or temperature sensors that regulate equipment during the smoking of sausages - it does not matter, the main thing is that it works properly. It is this employee who is engaged in all repair and verification work. Specialists of this type are in particular need in metallurgical and oil refineries, as well as in the chemical processing industry.
General information
A lot depends on the well-established operation of control and measuring instruments and automatic equipment in production, including the timeliness of the release of goods, labor safety and the absence of emergency situations. Many are interested in: what is it - an instrumentation and automation fitter? This is an employee who monitors the serviceability of such equipment at the enterprise.
Due to technological progress and the constant change of equipment, this worker is required to constantly develop and improve his skills. Sometimes it requires ingenuity and rationalization of the use of technology. The positive qualities of this specialization are a steady income, the importance of work for society, as well as a great demand for such specialists. Among the shortcomings, the need for constant development of new technologies, the risk of accidents and increased responsibility are most often singled out.
Mechanic of instrumentation and automation - what is it: type and class of profession
This profession is directly related to technology and signs, since it requires a specialist to be able to maintain and use equipment, as well as decipher various diagrams and drawings. As for the class of the profession, this is a performing position, which implies compliance with the algorithms and rules for the technical operation of equipment, instruments and other tools.
Activity
What is it - a mechanic instrumentation and automation? This is a repairer of instrumentation and automation, he is a universal specialist engaged in the repair, maintenance and operation of systems and devices. Among the main tasks of this employee, it is worth highlighting the repair and verification work, certification of devices and ensuring the smooth operation of all equipment that is installed in panels, circuits and consoles. As a workplace for this specialist, a table with current sources is allocated, and it also includes panels and panels with equipment installed on them.
Most of the working time, the employee is engaged in monitoring the operation of automated equipment and measuring instruments. A locksmith must know not only how the equipment entrusted to him works, but also how the technological process is arranged at the enterprise. It is because of this that the employee must constantly improve their skills and receive higher ranks as an instrumentation and automation fitter.
Employee Responsibilities
Employees who have received this position are required to exercise control over the equipment entrusted to them. They also test devices after repair work for the quality and efficiency of their operation. Employees must timely identify defects in the operation of equipment and eliminate them.
The employee is obliged to repair, adjust, adjust and install all equipment within his competence. In some companies, the work of an instrumentation and automation fitter assumes that he himself manufactures laboratory instruments, processes and prepares parts using the locksmith method, draws grids, scales, counts and fixes the readings of measuring instruments.
Employee Knowledge
The very first thing that is required from an applicant for a position is knowledge of chemistry, physics, mathematics, the basics of drawing and metallurgy. In addition, the employee must know how it works, what it is intended for and on what principle the equipment entrusted to him for repairs works. He must be able to read the schemes of control installations, and depending on the category of the employee, the complexity of these schemes and drawings may vary.
He is obliged to understand devices and tools designed to control and measure varying complexity and accuracy of readings, to understand what they are for and how to use them in practice. In addition, the instrumentation fitter's instruction assumes that he knows the tolerances and fits, understands the properties of insulating and conductive materials, and is able to measure resistance in different parts of the circuit. And he also knows the charter, labor protection and safety in the organization.
Skills
Members of this profession need to understand the drawings found in the technical data sheets of devices that they need to encounter in the course of their duties. They must understand all production processes where the equipment entrusted to them is involved. Engage in locksmith work and assemble, customize, heat treat and finish parts.
The job description of the instrumentation and automation fitter assumes that he performs electrical work with equipment, is engaged in soldering using all types of solders, creates various types of circuit complexity and carries out their installation. The employee must be able to assemble, adjust and repair instrumentation with different kind difficulties.
Important qualities
In order to successfully perform their duties, an employee must be mentally stable, nervously balanced, since his work involves increased responsibility and unsafe conditions. The employee must be responsible, physically hardy, have analytical and technical thinking, good spatial imagination. It is also a very important quality for an instrumentation mechanic to learn concentration and the correct distribution of attention, he will need a good memory, coordination of movements and the ability to distinguish between the rhythm and tone of different sounds.
Working conditions
Their official duties workers of this profession can perform both on the premises of the company and in open space, meaning the installation of equipment outside the walls of the building. A locksmith can carry out the assignments himself or work in a team if a whole team of employees of the organization is engaged in repairs. If the tasks are not collective, then the employee himself is engaged in the distribution and planning of the work schedule.
Before considering the vacancies of an instrumentation and automation fitter, it should be borne in mind that during the performance of duties, an employee may experience psychophysical stress due to increased liability, physical stress, and uncomfortable postures during repair work. In addition, the worker may be affected by the presence of specific working conditions, including noise, vibration, fumes chemical substances and constant temperature fluctuations, depending on the activities of the organization where he is employed.
Conclusion
What is it - an instrumentation and automation fitter, and what duties does this employee perform, discussed above in in general terms. More detailed information about what is required from an employee, you can get at the enterprise itself, find out when studying job descriptions and other guidance methodological information. It should be borne in mind that everything depends on the direction of the company, its scale, the number of locksmiths and the personal needs of top management.
The work itself is very stressful and involves a high level of responsibility, so this position should only be taken by healthy, stress-resistant specialists who have all the necessary knowledge and who have received the necessary education.
What do instrumentation and A fitters do in production? It all depends on the specifics and size of the enterprise where they work. In small businesses, instrumentation fitters are often charged with, among other things, maintaining computer networks, fire alarm or video surveillance equipment, CNC machines, etc. At large enterprises, with a large number of highly specialized services (electricians, automated control systems, networkers), the Kipovites are mostly engaged in their original business - maintaining equipment for heat engineering and other measurements. This type of equipment includes various sensors for flow, pressure, temperature, level, instruments for measuring the physical and chemical properties of the medium, and the like. Also, the specialists of instrumentation and automation are engaged in the installation, adjustment and maintenance of control, accounting, regulation and signaling circuits built on the basis of the previously mentioned instruments and other equipment: actuators, signaling and switching equipment, etc.
If you read about the profession of an instrumentation fitter in the Unified Tariff and Classification Guide (ETKS), you may get the impression that they service the equipment entrusted to them exclusively with a hammer and a file, since increased attention is paid to the issues of mechanical processing of materials. This is naturally not the case - more and more often, to configure instrumentation devices, you have to use special communication devices, for example, HART or BRAIN communicators running their own operating systems!!! Or even a laptop with specialized software installed. But a light sledgehammer, a crowbar, huge wrenches and files are also not rare guests in the hands of a Kipovian, and various mechanical assembly works can take up to half of the working time of an instrumentation fitter. After all, an instrumentation fitter and A is something between a mechanic, an electrician, a gasman, a plumber and an automated control system technician.
Perhaps, no one can do without their own mechanical section. instrumentation and A workshop of a large enterprise- the volume of plumbing work is very large. This includes the installation of protective and impulse piping, sections of pipelines and shields, as well as the manufacture of various types of casings, shields, visors, transitions, bosses, protective sleeves, selections, rods, rods, brackets, etc.
What you need to know and be able to locksmith for bale and a.
The instrumentation fitter must have at least basic knowledge of electrical engineering, physics, radio engineering, electronics, materials science, hydraulics, heat and gas supply. Understand the principle of operation of instrumentation, be able to read mechanical drawings, electrical circuit diagrams, automation functional diagrams, equipment layout plans. Be able to use measuring equipment: multimeters, oscilloscopes, generators. Knowledge of the rules of work in electrical installations of consumers is mandatory. It may also require knowledge of the rules of work in the gas industry or with pressure vessels, depending on the specifics of the work. Knowledge of a PC at the level of a confident user and the ability to translate technical texts from English or German with at least a dictionary will definitely not be superfluous. But the most important thing is that a good instrumentation fitter must thoroughly understand the technological processes in the area entrusted to him.