Why is there a small fps in world of tanks. Setting up graphics in WOT

World of Tanks is a very popular game, millions of tankers fight on the battlefield every day. In order to set the maximum settings, you need a powerful computer, which, of course, not everyone has.

Low FPS can be adjusted so that there are no strong lags at minimum settings. In order to achieve optimal values, you must adhere to the points below, but first a little theory.

What is FPS

Frames Per Second (FPS) translated from English means the number of frames per second. The higher this value, the better, the better the picture on the screen. It looks more realistic and smooth. Modern computers, the hardware and software of which is constantly updated, can produce hundreds of FPS even at maximum settings. Outdated computer models are content with lagging average settings at best.

What determines FPS WOT

FPS is a single computer system. If some component of the PC does not provide enough resources, the performance of the computer drops, therefore, the FPS will not be high in such a situation. In order to deal with the FPS, you need to study the computer and identify its weaknesses.

What FPS should be in WoT

A comfortable FPS value is determined by the player himself, however, for the normal more or less non-lag operation of the World of Tanks game, the required value is from 30 frames per second. If the FPS is from 60-120 and above, this is considered high rate, however, as already mentioned, this is available only to powerful computers. If the number of frames per second falls below 30, then the picture quality will turn out to be appropriate: friezes, freezes - unpleasant and inconvenient.

Why FPS sags in World of Tanks

The number of displayed frames per second primarily depends on the power of the device. Influenced by:

• number of processor cores, frequency;
• volume random access memory and speed of work;
• video card and its speed;
• hard drive, its speed and percentage of occupied space;
• heating level of components;
• general state of the system and more.

It follows from this that the first step is to compare system requirements World of Tanks games and PC power.

For minimum settings, in order to get normal operation at 30 FPS as a result, you need to:

• Processor: 2 cores at 2 GHz or better.
• RAM: 1.5.0.1 GB.
• Video card: 256 MB.
• Free disk space: ~25 GB.

For higher settings, i.e. 60 FPS, 120 and more, you need:

• Processor: 4 cores at 3 GHz.
• RAM: from 4 GB.
• Video card: 2 GB or more.
• Free disk space: ~36 GB.

What to do if the power of a computer or laptop does not give out more than 10-20 FPS, and the device itself does not reach the minimum requirements of the game? Most likely nothing will work. You should pay attention to online games about tanks, including session ones.

The minimum requirements correspond to the hardware of the computer, but the FPS does not reach 30? Please refer to the instructions below.

Setting up World of Tanks to increase FPS

First of all, you need to reduce the graphics settings in the settings of the game itself. Special effects, shadows, realistic structures and so on can take a lot of computer resources. Therefore, for productivity and comfortable game it is best to keep them to a minimum.

To do this, you need to open the World of Tanks settings window.

• Switch to full screen mode. Windowed mode is often the cause of FPS spikes.
• Reduce screen resolution. It is easier for a device to display information on a small number of pixels. The resolution of 1366x768 is quite suitable for a comfortable game, but, of course, this is not the limit.
• Disable shadows. They greatly affect the performance of the video card.
• Disable vertical sync. This function is responsible for a flexible picture, but for an additional 5-10 frames per second, you can sacrifice this.
• Disable triple buffering. It is effective only when vertical sync is running. If the latter is disabled, then it makes no sense to leave triple buffering enabled.
• Disable anti-aliasing. This parameter contributes to the smoothness of the picture, but with a weak device, in favor of comfort, you can sacrifice beautiful visualization.
• Disable all special effects. Steam, smoke, fire - all this is beautiful, but on powerful PCs. For weak devices, it is better to take care of the comfort of the game without friezes and downloads.
• Reduce the quality of terrain and vegetation. The situation is the same here, good drawing is reflected in performance.
• Disable grass in sniper mode. The point here is not only in FPS, but also in the fact that this parameter affects the game itself, sometimes creating interference when shooting.
• Lower graphics settings to the minimum. This is done in order to reduce the load on the video card.
• Lower the resolution of the 3D render. The depth of the 3D scene depends on this parameter. The smaller it is, the higher the performance of the computer will be in the end.
• Decrease draw distance. The field of view also greatly affects the FPS, the smaller it is, so, accordingly, the computer will process data faster.

After these options are turned off, the picture will become much worse, the smoothness of objects and the drawing of landscapes will disappear, and the small resolution of the game on the big screen does not look presentable, however, in order to get the game without lags and friezes, you need to follow the above points.

How to raise FPS in World of Tanks: setting up and cleaning your computer

A performance increase, although small, can be obtained by optimizing the parameters of the computer or laptop itself.

Clean your PC of junk files

The steps to clear the computer of garbage, "cache", should become a habit, because they must be performed regardless of the games or programs used. In order to clean your computer, there are many different applications and utilities.

For example, a special CCleaner utility is free and one of the most popular today. You can download it on the official website. After a short installation, you need to perform a number of actions:

1. Launch CCleaner.
2. Go to the "Cleaning" section located on the left side of the interface.
3. Click on the "Analyze" button, wait for the scan to finish.
4. Select "Clear".

Registry Fix

The registry stores data that helps the system interact with applications. Errors in the registry slow down the performance of your computer, so you should also follow the instructions below:

1. Launch CCleaner.
2. Select the "Registry" section.
3. Click on the "Search for problems" button.
4. After the scan is complete, select "Fix Selected..."
5. A window will appear where you need to specify the need for a backup.
6. Next, you need to click on the "Fix marked" button.

Transfer game from drive C:/

Very often the computer works slowly with large files due to the fact that they are installed in the local drive C:/. In order to correct the situation, it is not enough just to copy and paste folders from one drive to a drive, for example, D: / or E: /. For this you need:

1. Uninstall World of Tanks game.
2. Once again install Worldof Tanks on another, more spacious, local drive.

Defragment your hard drive

If you often install a lot of games and programs, this can lead to a scatter of applications across different sectors of the hard drive, which is also the reason for the long processing of the request. Defragmentation solves this problem by moving data closer together. For this you need:

1. Open the "My Computer" folder.
2. Right-click on the local drive where the game is installed.
3. Select the "Service" tab.
4. Open the "Optimization and defragmentation" subsection, select "Optimize".
5. In the list, select the desired local disk and click "Analyze".
6. It remains to wait for the completion of the analysis process and, if necessary, click "Optimize".

This manual is relevant for operating system Windows 10. For earlier versions of the OS, the order may be slightly different.

Update your graphics card drivers

New versions of drivers optimize the operation of the video accelerator, so the FPS in the game will be higher, and good graphics will be more accessible. In order to update the driver, you need to download it from the official website of the video card manufacturer - AMD or Nvidia are the most popular.

Disable all unnecessary background programs

It is necessary to close all unused programs: Skype, Discord, Telegram, Steam, web browsers and so on. You also need to disable autorun of unnecessary programs that, when launched along with the operating system, slow down and slow down the computer boot. In Windows 10, the AutoPlay tab is located in the Task Manager.

Raise process priority

In order for the system to allocate more resources game world of Tanks, while sacrificing other running programs, you must set its priority. You need to right-click on World of Tanks in the Task Manager and select "High priority"

Disable Windows Visual Effects

You can lower the graphics of the operating system itself, the animation of the windows will disappear, and the overall look will become worse, while increasing the performance of the computer. For this you need:

1. Right-click on the "My Computer" folder, select "Properties".
2. Then click on "Advanced system settings".
3. A window will open where you need to select the "Advanced" tab.
4. In the "Performance" subsection, click on "Settings".
5. Select "Ensure best performance" and save changes.

What else can be done

• delete everything unnecessary programs, files and folders. The hard drive works faster if it is not overloaded.
• Install WOT on SSD. If you run the game from an external hard drive, then it will work better, and, accordingly, the FPS will increase.
• Hardware overclocking of components. The processor, RAM and video card can be overclocked. At the same time, the indicators improve, and the heating of the components, and hence the entire computer case, also increases. To do this, you need to clearly understand all the consequences of such actions, including the fleeting wear of the hardware.

Programs and mods

FPS in World of Tanks can be increased with the help of programs and modifications. The most popular software includes:

• CCleaner - removes unnecessary garbage, fixes registry errors and removes programs efficiently without leaving their files on the computer.
• RazerCortex is a program that frees up as many resources as possible when starting a game, making this particular game a priority for the entire system. Performance on weak computers increases by 10-30 FPS. The program allows you not only to improve the quality of the game, but also to record video, stream, perform defragmentation and much more. You can learn more about Razer Cortex on their official website.
• WOTTweaker is a program created specifically for World of Tanks. It allows you to turn off all unnecessary special effects - clouds, explosions, smoke, fire and much more. Significantly increases FPS on weak computers. You can learn more about this program on the developer's forum.

In addition to individual programs, mods with compressed textures allow you to increase the FPS. They improve PC performance by reducing the load on the graphics card.

What to do if nothing helped

If none of the above gave any results, the game is still unplayable on the device and it was not possible to increase the FPS, then the only way out is to switch to another computer game. There are several good options here:

• Try playing War Thunder. This game at minimum settings works much better than World of Tanks. The technology here is varied (including aircraft and ships), and the mechanics are very interesting.
• Try to play Worldof Tank Blitz. This is a simplified version of the game, but it certainly cannot be called less interesting. The client is available for both mobile and PC platforms. Good online players and accessibility.
• Choose another tank game for weak computers.

FPS (frame per second) or the number of frames per second is an indicator of graphics performance in computer games, in particular in the online game world of tanks. The current fps is displayed in the upper left corner of the screen.

Somehow by chance I am in this article on www. it's simple. The fact is that the graphical performance of this computer game is far from ideal.

How many fps do you need in world of tanks for a comfortable game?

Ideally, the higher the fps, the better. A very worthy indicator is the value of 80 fps, in this case it will be almost perfect to play, nothing will slow down. However, only owners of powerful computers have such indicators, although other tankers can quite achieve such performance. However, in this case, it is possible to achieve 80 fps only due to a significant deterioration in graphics parameters, and even then not always.

The lower limit is 30 fps, and the record should be kept at the minimum value. Naturally, if you point the camera at the gray sky of the world of tanks, then the fps will be higher than in a real battle. Many tankers, despite this, manage to play at both 15 fps and 10 fps, and even win in such very limited conditions. Despite their dedication, I personally repeat their exploits on www..

Playing and fighting not only with rivals, but also with your own graphics is not a pleasant thing. The graphics will twitch, slow down, and these are lost seconds, the inability to aim properly. In short, the pleasure of such a game will be dubious, and missed game moments will noticeably affect the overall combat effectiveness. However, everyone determines the level of a comfortable game for himself, not everyone will update their computer specifically for world of tanks.

We raise fps

But the number of frames per second in wot can be raised using less radical methods. The simplest and most effective method performance improvement is the competent setting of graphic parameters. Simplify the graphics in wot until the game conditions become comfortable, while the picture quality is as beautiful as possible. Ideally, we should strike a compromise between quality and performance.

First of all, you can put shadows and lighting under the knife, additional effects from explosions also put a lot of load on the computer, and you can’t call them mandatory. Such a cleaning of the rows will allow you to noticeably increase the fps in the game on the same computer. Although this method also has its fundamental limitations, when all settings have already gone to the minimum, but the performance still does not suit you.

There are additional programs for wot, which are designed to simplify the graphics even more so that it is comfortable to play even on old computers or budget laptops. Personally, I would not overestimate their capabilities, in normal mode, the standard settings of the game client will be enough. If this tool for raising fps is not enough, then you need to consider the possibility of improving the hardware.

Total

Fps in the game should not fall below 30, this will allow you to play relatively comfortably and show everything you are capable of in the game. Ideally, the frames per second should be 80-100, but it is better to evaluate your own feelings from the game. After all, not everyone is ready to play in too spartan conditions, when all the graphic excesses, which in wot will be turned off a little anyway. Remember that additional mods negatively affect the performance and stability of the game client, so it is better not to abuse them.

Back to section World of Tanks
on the forum

tanks - bonus codes - FAQ - mods

In this article, we will try to consider in detail how you can increase the frame rate (or FPS) in the World of Tanks game.

The method is universal and suitable not only for WoT, but also for other games.

Surely you are wondering: how to get rid of lags simple ways that work?

We need CCleaner for this. Change other settings already inside Windows systems 7.

• Let's start improving performance with power.

Go to "Control Panel" - "Power Options". As a rule, in the power settings there is an item "Balanced". Usually this item is set by default and is designed for laptops to balance power between high consumption and performance.

Our stationary PC does not need this, so we can safely switch to the "High performance" item (all pictures are clickable).

• With the power supply finished, go to the Desktop, press "Start + R".

The Run window will pop up. We type in the field "msconfig", click "OK". A new "System Configuration" window will appear. Go to the "Download" tab. In this tab we find "Advanced Options".

In the item "Number of processors" put a tick and select the maximum number of processors that are on your computer.

Go to the item "Maximum memory", set the maximum amount of RAM that you have. In our case, we have a maximum of 4 GB (4096). After setting the parameters to the maximum, uncheck the memory and processor items. Click "OK".

Go to the "Services" tab. In this tab, we first check the box "Do not display Microsoft services", then we remove services that are unnecessary for us. We unchecked the "Google Update Services" item. After that, click "Apply".

The next tab is "Startup". We remove programs we don’t need: “Amigo”, “MailRu Update”, “Kometa”, “uTorrent”, “Steam” and other services that we don’t need in startup. These are all programs that start when Windows starts. Click "Apply" - "OK".

• Now we need to change the style of the theme.

Windows spends quite a lot of resources on visual effects. Right-click on the "My Computer" icon, select "Properties" - "Advanced system settings".

The System Properties window appears. We are interested in the "Advanced" tab - "Performance" - "Settings". Click on "Settings".

Visual effects are set to "Provide the best view." We need the item "Ensure the best performance". As soon as you select this item, all checkmarks will disappear. But we will need to leave the only checkbox "Use display styles for windows and buttons." Click "Apply" - "OK".

• Optimize your computer hard drive.

Right-click on the local drive (C :), go to "Properties". We need the "Service" tab. Next, we need the items "Check disk" and "Disk defragmenter".

Click on "Run a check", select both items "Automatically fix system errors" and "Scan for and repair bad sectors." Next, click "Launch". We will warn you right away that the check will take a long time, it is better to put the check at night so that it is completed in the morning.

After that, go to the "Disk Defragmenter" item. We are interested in all local disks of the computer. Select "Analyze Disk" one by one, and after the analysis - "Defragment Disk".

• Clean up junk with CCleaner

We are interested in the item "Cleaning". Click "Analysis", as it will be completed - "Cleaning".

After it, we go to the "Registry" - "Search for problems" - "Fix".

The above procedures will help raise the FPS on your computer by 10-20 frames per second.

Especially for World of Tanks, we need the MultiPack package from PRO Tanki.

The package installer will prompt us to select mods. Specifically for WoT, we need to select the item "Custom selection of mods", uncheck all the boxes and click "Next".

Again, it will be necessary to remove all the checkmarks from all items, click "Next".

We reach the menu "Choose visual effects settings".

Check the box "Set Windows game priority high" and "I have a weak computer and I want to increase FPS". As a result, you will have a bunch of checkboxes. Click "Install".

In general, the measures taken should give a good increase in FPS for games.

Write in the comments if this method helped to increase FPS in World of Tanks.

Passion how I love to solve problems-riddles that IT-her-life throws up. This time the trouble happened in my favorite toy World of Tanks, where I'm trying to become an extra nerd. The game has long been criticized by players in terms of performance, as competent multithreading has not yet been implemented so that multi-core processors begin to justify their purchase. But it's worth saying Thanks game developers that in the latest patch 9.14 they introduced a new sound engine, which not only colored the game with new sounds, but also runs on a separate CPU core, which has a beneficial effect on overall performance when playing on powerful computers. It would seem that fps should grow a bit, but my problem did not look like low Frames per Second in general, but fps drop in WoT after some time.

Since absolutely all available parameters are set to the minimum position, at first I sinned on modifications (mods) that extend the standard game client in Python. There are a couple of mods that are officially recognized by everyone as "fps reducers":

• legendary eXtended Visualization Mod (XVM, deermeter)
• mod Angles of horizontal aiming (UGN)
• a mod that reflects latency directly in battle to Wargaming.net servers.

OK! Let's remove the mods, but that didn't help. Thanks to a video from a well-known professional player and author of modpack ProTanki - , I was aware of the serious impact of bad Internet (high latency when delivering network packets) on FPS. Many do not understand how it can be connected network and video card. The fact is that the video card processes a lot of frames for you in the buffer and imagine a situation when, due to large delays, information comes from the server that your tank or tanks of allies / enemies are now not at this point, but at another, so called the "teleportation effect". The video card is "forced" to throw out the previously done work and start calculating everything again. If the video card is not top-end, then it turns out that bad Internet adds work to it.

But logically, bad internet not-at-my-home should keep fps low throughout the fight. And the problem with an enviable constancy looked exactly like a drop in fps after a couple of minutes of the battle. I began to look, and which settings are of a dynamic nature. I will not torment you, the setting is called dynamic change in 3D rendering. I also set the 3D render parameter to a satisfying 95%, which allowed small details to disappear and greatly simplify the silhouettes of tanks in the distance, which will make it easier for the video card to work. That's it! Drawdowns from 120 fps to 40 fps disappeared like a bad dream. Stay random, VasiliscCom goes to battle!

One of the most important parameters that affect the playability of online games is FPS.

FPS stands for Frame per Second (the number of displayed frames per second).

Why is this needed? Proper graphics settings in World of Tanks, like in any other Online game significantly increases the chances of winning. FPS drops interfere with movement, are difficult to aim at, and usually end up with "shots to nowhere", long reloads and victory for the enemy.

FPS depends on the configuration of your computer. A good FPS starts at 35fps and up. The optimal result is 50 frames per second and above.

To achieve good FPS, you must either have a high-performance gaming computer with a top-end graphics card, big amount RAM and a powerful processor, or try to customize the game to your configuration as much as possible. Weak spots in the system can be compensated for by competent graphics settings in World of Tanks, which we will talk about now.

For convenience, we divided the settings according to the degree of impact on graphics and FPS, using a color scheme.

These settings can be twisted "as your heart desires." Doesn't affect FPS.

We recommend correcting first. It is true for mid-range systems, when you want to see both beautiful graphics and stable FPS, but resources do not allow you to set "everything to the maximum". These settings do not greatly affect the gameplay.

Graphics settings that don't affect FPS

You can customize these settings as you wish without worrying about performance loss.

Graphics settings affecting FPS

3D render resolution. Changes the resolution of 3D objects in the scene. Affects the depth of the 3D scene. Reducing the setting improves the performance of weak computers.

You can adjust the 3D rendering right during the game. If during the battle your FPS "dipped", use "right Shift -" to decrease the depth of the scene drawing and "right Shift +" to increase it. Decreasing depth will increase FPS on the fly.

Screen resolution. The higher the resolution, the higher the load on the video card. It is recommended to select the value corresponding to the monitor, otherwise the image will be "blurred". On very old video cards, you have to lower the resolution to get "playable" fps. We recommend lowering the resolution below the screen resolution as a last resort, if other methods no longer help.

Vertical Sync and triple buffering. Vertical sync is the synchronization of the frame rate in the game with the vertical refresh rate of the monitor. Triple buffering avoids the appearance of artifacts in the picture. If your system produces less than 60 FPS, the developers recommend disabling both options (note: on modern monitors it does not really affect the picture).

Smoothing Removes jagged edges of 3d objects (staircase effect), making the picture more natural. It is not recommended to enable at FPS below 50.

Go to the advanced graphics settings: menu "Graphics", tab "Advanced" graphics options.

"Graphics" Maximally affects the number of FPS given by your video card.
Switching the graphics mode to "Standard" switches the engine to the old render with outdated effects and lighting. With standard rendering, most of the advanced graphics settings become unavailable. It is recommended to enable on weak computers.

Texture quality. The higher the quality of the textures, the more detailed and sharper the picture in the game looks. The higher this parameter, the more dedicated video memory is needed. If your video card has a limited amount of video memory, the texture quality should be set to the minimum. (Maximum texture quality is available only when "improved rendering" is enabled and on a 64-bit operating system.)

Lighting quality. Unlocks a range of dynamic effects in the game: sun rays, optical effects, shadows from physical sources (trees, buildings and tanks). This setting greatly affects the performance of the video card. If you have a weak video card, set the lighting quality from medium values ​​​​and below.

Shadow quality. Affects the rendering of shadows from objects. Reducing the quality of the shadows does not greatly affect the gameplay. If you have an old video card, the first thing to do is to set the quality of the shadows to a minimum.

Grass in sniper mode. It affects not only performance, but also gameplay. If your FPS in sniper mode "sags" below 40 - you need to disable it.

Extra quality effects. Affects the "special effects" in the game: smoke, dust, explosions, flames. By decreasing this parameter, you can reduce the number of particles in the frame and limit the distance at which they will be displayed. It is recommended to leave at least "low" otherwise explosions and other elements necessary for orientation in battle will not be visible.

Add. effects in sniper mode. Regulate the same thing, but in sniper mode. If during sniper mode your FPS sags, which undoubtedly affects accuracy, it is recommended to reduce the parameter (not below the "low" level).

amount of vegetation. Adjusts the density and distance of vegetation rendering in the game. At low FPS, it is recommended to set it to the minimum. Thus, you can free up precious megabytes of video memory.

post-processing. Affects the effects in the afterlife - shading and the effect of hot air from wrecked cars and burning objects. If you are hiding behind a destroyed tank and your FPS starts to drop, it is recommended to disable this option.

Effects from under the tracks. They saturate the picture with the effects of scattered soil, splashes of water and snow. The setting does not affect performance much. Disabling can achieve a small release of video memory.

landscape quality. The parameter determines at what distance the quality of the terrain begins to be simplified. This setting is very CPU intensive. Attention! At the minimum setting, there is a strong distortion of the landscape, so you may not see any ledge behind which the enemy is hiding, and after the shot the projectile will hit the edge of the obstacle, and not where you were aiming. It is recommended to set the setting value not lower than "medium".

Water quality. The parameter adds the effects of waves, water vibrations when moving, reflections from objects. If you have a weak video card, it is recommended to reduce the setting.

Decals quality. Affects the rendering distance and detail of decals - detail textures that improve image quality (fallen leaves, traces of dirt, paving slabs and other well-aimed objects scattered across the map). When set to "off", even craters from projectiles disappear. The more decals, the more video memory is required to load them. If you are not bothered by the simplification of the landscape, it is recommended to set it to "minimum", at low FPS.

Detailing of objects. In the game, all objects have several models of different quality. At the moment, buildings have 3 types of objects, tanks from five. The quality of drawing objects greatly affects performance, and at large distances small objects will still not be visible. With the removal of the object, its model changes to a coarser one. The parameter affects the distance at which more than quality model. The lower the parameter is set, the shorter the draw distance for quality models will be.

foliage transparency. Turns off the rendering of foliage at close range. It is recommended to enable on weak systems.

Tree detail. The setting works on the same principle as "Detailing objects", but only for trees. If you experience FPS drops when trees appear, it is best to set this parameter to the minimum (along with it, it is recommended to turn on "Foliage Transparency").