How to disable windows 8 security.
How to enable Windows Defender in Windows 8 Or is it already up and running? How can they check a suspicious file or folder? There are many sites on the Internet that describe the operation of this antivirus built into Windows 8, but none of them can ask a question, comments are disabled everywhere. In short, this is my story. Recently I bought a laptop with Windows 8, immediately installed an antivirus program in it, then I learned from friends that Windows 8 already has Microsoft's Windows Defender antivirus program built in, I want to leave it and delete the one I installed, why do I need two antivirus programs on the computer. But I can’t enable Windows Defender in Windows 8, I just can’t find it anywhere, it seems to me that this built-in antivirus is completely absent in my eight. Sergey.
How to enable Windows Defender in Windows 8
In our article, we will tell you how to enable and disable, if necessary, the Windows Defender antivirus built into Windows 8.Enable Windows Defender very simple, but if you have a third-party antivirus program installed on your computer, then you must first remove it from your operating system, otherwise turning on Windows Defender will throw an error. " Windows Defender is disabled and does not monitor your computer. If you are using another application to monitor for malware or unwanted programs, use the Action Center to check its status."
Therefore, if after buying a computer with Windows 8 preinstalled, you installed an additional antivirus, uninstall it. Then enable Windows Defender.
So, the installed antivirus is removed, turn on Windows Defender. Right-click on the left corner of the desktop and select "Control Panel"
In the "Search" field, enter Windows Defender or Windows Defender
and here you are, our built-in antivirus is found.
Click on it with the left mouse and run. Or you can create a shortcut on the desktop for ease of launch. We click on our antivirus with the right mouse and select "Create Shortcut". If the antivirus does not start, read on.
Right-click on the right corner of the desktop and select "Control Panel"
then "System and Security"
"Support Center",
"Safety"
Virus Protection- Click "Enable Now".
That's it, our built-in Windows Defender Antivirus is now enabled and in production.
Launch Windows Defender. The main window of the program. Home.
In this window, you can check your Windows 8 for malware. Check Options:
Fast - during a quick scan, the areas that are most often infected with malware are scanned, these are startup objects, temporary files.
Full - all files on your hard drive are checked.
Special - selected files and folders are checked for the presence of viruses. Select the folders you want to scan. I advise you to always check the disk (C:) for viruses.
Updates. Windows Defender is updated automatically.
Here you can see all malware detected by Windows Defender Antivirus. You can remove them permanently, tick all viruses and click "Delete".
If suddenly the antivirus made a mistake (which is extremely rare), you can restore the file you need, mark it with a checkmark and click Restore.
Options.
In order for your antivirus to always protect you, I advise you to check the box “Enable real-time protection”.
Windows Defender will always be in random access memory and watch everything that happens in your Windows 8. How it happens.
For example, you tried to copy a file infected with malware from a flash drive, the built-in Windows Defender antivirus will automatically remove the virus from your computer and from the flash drive too.
If you are interested in more complete settings, you can read our article "".
Initially, with operating system Windows 8 comes with a special utility that allows you to protect yourself from spyware if another one is not installed on your computer. This utility is called Windows 8 Defender. Moreover, it will not protect against other types of malware. Therefore, you should additionally install other security software for better protection. After installing the antivirus, the defender is disabled. And if you remove the antivirus program, then it will turn on again and continue to fulfill its purpose. But sometimes, it happens that the defender does not turn on. In such cases, you must turn it on yourself. About how to enable windows defender and will be discussed in today's article.
Enable Windows 8 Defender
To do this, you need to open the Action Center. This can be done by clicking on the message icon in the notifications panel and clicking on "Open Support Center".
There is another way to get there through the Start menu by entering the name of the center in the search that is located there.
And now, you need to expand the tab related to security and click on all the "Enable Now" buttons.
After these steps, Windows 8 Defender will be activated immediately. It is recommended to update it later so that the protection is more up-to-date.
How to use Windows Defender?
In general, the defender independently checks files and performs timely updates. The user can only periodically run a selective scan of individual folders, flash drives and other storage media, as well as perform a full scan of the computer.
Also, initially, Windows Defender 8 takes part in the MAPS service. Sending all information about detected malicious code to the accounting system. That helps to regularly update protection to combat new threats. If you would like to help MAPS, you can choose the advanced level of participation.
To make it more reliable, open the settings tab and in the "Details" item, check the boxes next to: "Scan removable media" and "Create a system restore point".
This will help, in case of some critical problems, to roll back to a restore point that was automatically saved earlier.
Install Windows 8 Defender on Start Screen
To make it more convenient, in the future, to refer to this program and not look again, you can pin it to the home screen. To do this, in the start menu, in the search, type in “defender” and right-click on the desired icon. In the expanded context menu, select "To the home screen".
Then drag the program icon to where it will be convenient for you to open it.
In the case when it is not possible to turn on the Defender, you can try the system files and try again. And if that doesn't help, try starting the Windows Defender service.
If you have any questions, leave them in the comments. Good luck!
Developed by Microsoft programmers, Windows Defender is security software that is an integral part of operating systems such as Windows 10 and the earlier release of Windows 8 (8.1). The protection activation process takes place along with the installation of a certain system on your personal computer.
The main task of this software is to support the protection of personal computer information from all kinds of virus attacks, from the introduction of various "harmful" programs into the system. However, in some exceptions, it is useful to know how to disable Windows Defender 10 and 8.1 permanently. After all, the protection process is carried out quite normally, and as soon as a fresh anti-virus program is installed on the user's device, the built-in software, in theory, automatically stops working.
Nevertheless, the guide will help you learn and understand in what cases, and most importantly, what methods you can use to block anti-virus software, and, if necessary, activate security software. You may need such an action in some episodes of working on a PC. The most popular of them are when the basic - built-in - anti-virus program does not allow you to install the utility (let's say, a game) that the user needs, defining them as a carrier of danger.
Sometimes, in addition to disabling the antivirus itself, it is also important to pay attention to the SmartScreen filter, since it can also block the installation of new software on the computer. Then its functional responsibilities should also be deactivated.
After fresh updates, the icon of the antivirus utility is automatically shown on the Windows panel. To turn it off, go to the task manager using the "Start" button and make an advanced option, make a mark on the shutdown in the "Windows Defender Notification icon" item (located in the "Startup" field). After reloading, the icon on the monitor will no longer be present.
Turn off Windows Defender 10 and 8.1
The initial stage of the process, how to disable the Windows Defender service in Windows 10 and 8.1, is the same for both operating systems. A description of how to perform a complete shutdown of antivirus software for Windows 10 will be given below. To start deactivating the defender, click (right-click) on "Start" (lower left corner of the monitor) and find the "Windows Defender" icon in the control panel. It is located in the upper left column, for this the user needs to switch to the “Icons” view.
The main window of the protection utility will be displayed on the PC screen. Sometimes users can read the following message in the window - the notification "The application is disabled and does not monitor the PC." This window informs you that, most likely, another protective program against viruses and other negative factors is activated on the PC. Further work to remove the standard anti-virus software will be carried out specifically for a specific operating system.
Windows 10 system
The problematic question "how to remove Windows Defender 10 forever" for this operating system can be solved in a number of ways. First, the standard. This method is not a 100% guarantee of turning off anti-virus software (defender will automatically start working again in about a quarter of an hour), but it is sometimes used.
On the pop-up panel "Start", find the item "Settings" and click on it. Next, we go to the “Update and Security” department, we find the “Windows Defender” icon we need there. In the "Real-time protection" sub-item, instead of the "On" mark, click and activate the "Off" mark.
If your goal is to permanently eliminate the antivirus, use the following methods. The essence of the methods is to use two types of editors: the registry itself and the local group policy editor (GPE). The sequence of actions to disable the security program using GPE is as follows:
We display the (pop-up) Run window using the Win + R keyboard combination, and type gpedit.msc to activate the local group policy editor.
In the "Computer Configuration" menu, go to the "Administrative Templates" section. Then in the paragraph Windows Components"Look for" Endpoint Protection ". We click (twice) on the column "Turn off Endpoint Protection".
A window will open called "Turn off Windows Defender" - the old option, the new one looks like "Turn off Endpoint Protection". On the left side, you will see three options "Not configured", "Enabled" and "Disabled". Make a mark on "Enabled" and click OK.
Antivirus software is completely deactivated. When you try to activate this software, a window pops up with the message "This application has been disabled by group policy."
The same procedure can be carried out using the Windows registry editor: similarly, as in the case described above, open the "Run" window (Win + R button combination) and type regedit to start the editor. We go through the chain of lines HKEY_LOCAL_MACHINE-SOFTWARE- Policies- Microsoft- Windows Defender. Generate a DWORD key, the key name is DisableAntiSpyware, sometimes it is missing. The value of the key can be twofold - set to 1 to turn off, and 0 to turn on.
Everything, the security program that was automatically added to the computer, is disabled. Don't be surprised if you still see the antivirus icon, it will disappear after the first reboot of the PC. Accordingly, each time you turn it on, a window will pop up with a warning about the disabled virus protection program. You can remove it, for this you need to click on the message and select "Do not receive more notifications about anti-virus protection." Sometimes, if the previously described deactivation methods did not help, it is necessary to use special free software, the description of which will be given in the articles below.
Windows 8.1 system
To completely block anti-malware software for Windows 8.1, you need to follow these steps. We go to the "Control Panel" menu and find the item "Windows Defender". Select the "Administrator" sub-item in the "Settings" field. We remove the pointer from the notification "Enable application".
The result of your work will be a new notification about the disabled defender.
Using other apps to block Windows Defender
As described above, it is not always possible to deactivate antivirus software in a simple way using only the capabilities of the software installed on your PC. Therefore, specialists have developed special utilities that allow users to achieve their goals. Programs are freely available on the Internet, while they are completely free.
One of these utilities, using which, it is possible to carry out the procedure for turning off the anti-virus Windows programs 10 (if the usual shutdown methods did not occur), is the Win Updates Disabler utility. She wrote on plain language, without further ado, the language of the software is Russian.
The program was originally written to disable windows updates 10, which are held automatically by the OS. However, the software can also activate and deactivate the protection features of the operating system and the firewall.
You can also work with a special development - Destroy Windows 10 Spying (abbreviated as DWS). The utility was created to prevent the system from tracking your activity, but in the advanced format you have access to turn off Windows Defender antivirus completely as well.
Recommendations and a step-by-step guide on how to permanently remove Windows Defender 10 are also presented in video format. It will help you to study in more detail the chain of actions of turning off the defender (anti-virus program), in case you have any difficulties using the text version of the manual. Video - option contains a description and demonstration of the elimination of an anti-virus program, using all the methods described above.
How to activate Defender for Windows 8 (8.1) and 10?
In the event that in the "Windows Defender" menu of the control panel, you read a message that the PC is not being monitored and the protection software is disabled, two conclusions can be drawn.
- First: another antivirus program is activated on the PC. Do not worry! When this utility is removed from the system, Windows Defender is activated automatically.
- Second: the defender was blocked by you intentionally, based on a particular life situation. Pretty easy to reactivate it.
In Windows 10, to re-enable anti-virus protection, simply click on the appropriate message (search in the taskbar). All work will be done by the system automatically, without your intervention. True, this does not apply to antiviruses that were turned off using editors. In this episode, you will have to follow the steps to turn the application back on.
As in the case of deactivating anti-virus software for the Windows 8.1 system, turning on its defender requires sequential actions. Right-click the mechanical manipulator (mouse) on the "flag" of the antivirus on the taskbar, in this way you will enter the Program Support Center. Most likely, you will receive notifications about the disabled protection against spyware (special programs), unwanted utilities, and also that the security program is not activated. To start the antivirus, you just need to click on the “Enable now” mark.
We really hope that the information presented was interesting and useful to you in such an important issue as how to disable the Windows 10 / 8.1 / 8 defender service, and you will be able to put it into practice. We are waiting for your comments, as well as evaluations of our work! We have helped you - share your knowledge with your friends. Thank you!
Each computer user tries to protect it from the penetration of malicious code by installing a distribution kit of some kind of antivirus. Yes, it was relevant until it came out a new version operating system - windows 8. Many users have paid a lot of money to purchase such software, and when reinstalling the operating system they install their own antivirus, and therefore do not know how to enable windows 8 defender on their computer, and by default it can be disabled. With the release of the new OS, there is no need for third-party antivirus programs. You can simply turn on the windows 8 defender, and forget about your antivirus, which you need to constantly update for a certain amount of money.
Windows Defender is called Windows Defender, this is a full-fledged built-in antivirus that will reliably protect your system, but if you have already installed your antivirus program, you will not be able to enable Windows Defender in Windows 8, the system will give an error until you remove the installed antivirus.
To enable the defender, do the following:
- Right-click on the left corner on the desktop, in the drop-down window we find the "control panel", a search window will open, we prescribe Windows Defender in it. Windows 8 built-in antivirus window will open.
- We click on it with the mouse, and it will start. You can create a shortcut to the program on the desktop so as not to do this long operation every time. The program should start, but if it doesn't, do the following:
- Again we go to the control panel, look for the option "system and security" → "action center" → "security" → system protection from viruses → "enable now". So you turned on windows defender 8.
You can turn on a very useful program option: "real-time protection", then you will be under reliable protection even while surfing the Internet.
Although windows 8 has a built-in antivirus, some users find that their own antivirus program is more reliable, and many want to disable windows 8 defender , let's see how it's done.
- The operating system itself recognizes a third-party anti-virus program, if it is installed on the computer, and automatically disables the built-in defender. Disabling does not mean deletion, and sometimes a window will pop up that you need to check your computer for viruses, or update the system, which is what the built-in antivirus does.
- Move the mouse cursor to the right corner of the desktop, then find the tab "Settings" → "Control Panel" → "System and Security" → "Administration" → "Services".
- In the window that opens, find the windows protection service, and click on it with the mouse button.
The program properties window will open, where on the startup type tab, select the "disable or stop" option. After selecting, click on the OK button, and the defender will either be completely disabled or stopped.
Now you know how to disable windows 8 defender, but Microsoft does not recommend disabling it, after all, it notifies the user about system updates and errors that have occurred, and if you do not trust your antivirus, it would be better if you use a proprietary antivirus from a world famous company.
Hello everyone, today we will analyze the question of how to disable windows defender 8.1. Let me remind you that the defender in windows 8.1 is a built-in antivirus program that comes with the operating system. I’m of the opinion that everyone scolds him not correctly, of course he is losing so far to the market leaders in catching viruses, the same Kaspersky or Avast, but you understand that the fact of its presence, immediately after installation, gives a huge plus, not everyone has the Internet immediately to install the antivirus program it needs, since most of them require the presence of the Internet, and are distributed by thin installers, when launched, you drag everything from the network. And here the user starts to run his own programs that a friend brought him on a flash drive, and everything like that, suppose that there is a worm, and in 90 percent of cases it will be caught by the windows 8.1 defender, plus, yes, definitely. Disabling it, I see the point only when you already have another antivirus installed, and even then, they are extinguishing it right now, okay, enough lyrics, more practice.
Where is windows defender 8.1
And so you installed a system where you can download windows 8.1 for free the latest version, and even updated for January 2016. I already told you, besides, also on Yandex disk. And so you can find windows 8.1 defender in the control panel, to get into it, right-click on the start button and select
In the Windows Defender that opens, go to the Settings item, as you can see, there is a checkbox Enable real-time protection, then we will disable it first of all.
How to disable windows defender 8.1
As a result, the Windows 8.1 defender will turn red, which means it is turned off at the moment, but we need it to turn off altogether.
To completely disable this utility, go to the Administrator item and uncheck the Enable application checkbox there, as a result, you will get a warning that Windows Defender is no longer monitoring your computer, since its service has been stopped. We close the windows.
Now you know how to disable windows defender 8.1, but let's make sure that the service is not really running. To do this, go to the control panel in the Administrative Tools item.
Then to the service station
or even easier, press WIN + R and enter services.msc there
Find here, the Windows Defender service, and see that it is not running and its startup status is manual, which means that it will not start on the next reboot.
