How to make a battery-powered night light from LEDs. How to make a night light from scrap materials with your own hands

Night, darkness - not everyone likes this environment, which is why night lights were invented. Children are afraid to be left alone in dark rooms, and night lights have always helped to brighten up this atmosphere. If you make it unusual, children will go to bed with great desire.

There are many different handmade night lights, and today we will show several options.

Night light made of wooden sticks.

We will need:

Wooden sticks, you can choose the size as you wish;

PVA glue (or other wood glue);

Socket and light bulb;

The mount (base) for the cartridge can be made from corrugated paper;

1. We take our sticks and glue them into squares. We will need about 25-35 of these squares.

2. We cut out the base for the cartridge from cardboard. The size corresponds to the size of the stick squares.

3 . We make a hole for the cartridge.

4. Depending on the size of the cartridge, we glue together several squares and cardboard, which will serve as a stand for us on the table.

5. We begin to build our lamp by gluing all the squares one by one. We stack them on top of each other in any position.

6. We insert the lamp socket and our lamp is ready!

How to make a night light “Starry Sky”?

The starry sky is a mystery that has always attracted our attention and our gaze. Now, thanks to the night light, you have the opportunity to enjoy the starry sky without leaving home. From the material, you will only need things that every home has:

Sheet of foil;
- jar with lid;
- flashlight;
- awl;
- scissors.

1. Take a sheet of foil and carefully make holes with an awl. If we want to get a full-fledged night sky, then we can use a star map.


2 . We cut off the excess foil, leaving the dimensions suitable only for the jar, the height of the sheet is equal to the height of the jar.

3 . We twist the sheet and insert it into the jar.

4. We put a flashlight on the bottom, turn it on and close the lid.

Enjoy the starry sky!

How to make a beautiful night light for your bedroom?

In order to make such a wonderful and beautiful night light, we will need:

Jar (glass or plastic) with a lid;
- lace fabric;
- a small flashlight;
- scissors;
- sewing machine.

1. Using a centimeter, take measurements from the jar. We need to know the exact dimensions to sew the overlay fabric correctly.

A night light is a lighting device used both for its direct functional purpose and as an additional decorative element. It is difficult to overestimate the role of these lamps in shaping the design of a bedroom or lounge. In stores and electrical markets you can find a variety of models, but they will all resemble each other in certain aspects. If you want to show your imagination and originality, then create a night light from LEDs with your own hands.

You can make a lighting fixture to decorate your bedroom from scrap materials, including CDs, cardboard or plain paper, nylon threads, sheets of plywood, glass or plastic bottles, etc. There are so many options that it’s impossible to fit everything into one article. The emphasis is on LED lamps, so the devices are less energy-intensive and as safe as possible.

This device is characterized by compactness and simplicity of design, which is associated with the use of a simple electrical circuit. Any person who has set such a goal can create it independently. When creating a design, focus on the interior of the room in which the device will be installed.

For the production of lighting fixtures, old electrical parts obtained from failed lamps and even unrelated equipment, including fumigators, mobile phone chargers, electrical plugs, etc. can be used. To decorate and create a unique shape, cans, plastic or glass glasses, children's toys and even syringes (without a needle, of course) can be used.

If you are confident in your abilities and want to bring an unusual idea to life, you may need to purchase more expensive items and parts.

When assembling the lamp, pay great attention to electrical and fire safety. If low-power LED bulbs are used, the possibility of a short circuit cannot be ruled out. The consequences can be especially unpleasant when using lamps in children's rooms. Try to exclude even the most unimaginable and unlikely outcomes.

Avoid using classic incandescent or halogen lamps as they become excessively hot during operation. LEDs are the ideal solution. In addition, they reduce the amount of electricity consumed by 7-8 times and will be economical even with the lights on for the whole night.

Of course, you can choose a low-power incandescent lamp. Using an illustrative example, let’s calculate the amount of energy consumed per year for a 25 W incandescent lamp. Let's assume that the lamp works for 5-6 hours every day. In this case, in 360-365 days (exactly a year) 55-60 kW will accumulate. The indicator is insignificant, but you can save money. With identical power, diode lamps will be much brighter, so if the luminous flux from a 25 W incandescent lamp is enough, then buy a 5 W LED (or less).

In night light circuits made from fumigators, chargers with voltage reduction through resistors, wide- and narrow-directional LEDs can be used. Choose products with maximum brightness.

Narrow-beam devices have a limited light beam, aimed only in one direction. This device will look good together with the main source of lighting (for example, a chandelier), but you must connect the chandelier and the night light via a double switch so that you can activate the devices separately.

Varieties of homemade night lights

Below we will consider the most common options for making night lamps with your own hands.

Night light made of transistors in the shape of the Moon

To build a lamp you will need an LED strip and two transistors through which the first element is connected. The first transistor will automatically regulate the device due to the incident light, after which it will trigger the second transistor, which directly turns on/off the flexible board.

By adding a resistor to the circuit, you can adjust the sensitivity and threshold at which the transistors operate and the backlight lights up.

As for the design of the night light, before starting work, find a sheet of plywood and cut a circle out of it. The base should resemble the letter "O". Use a printer and print out an image of the Moon. When everything is done, take a drill in your hands and drill two holes. One - in the upper part, will serve as a fastening of the night light to the wall, the other, in the lower part - will be used for pulling the cable.

Next, glue the base of the lamp to the circle of plywood using special PVA wood glue. You will first have to sand the surfaces, making them perfectly flat and smooth. Be sure to degrease, otherwise adhesion will be weak. The design as a whole is as simple and understandable as possible.

After a few hours (until it dries completely), measure a piece of LED strip, placing the board along the edge of the letter “O”. Cut off the excess portion at the location indicated by the manufacturers (look for the picture of “scissors”).

  1. Solder the wires and LED strip.
  2. Glue the printed image of the Moon onto a circle of plywood. Take your time and smooth out any wrinkles. The edges need to be folded, forming a “skirt”, which will have to be cut off later.
  3. Wait for the glue to dry.
  4. Drill a hole to install the photocell. Choose a place so that the element matches the glued image.
  5. Remove the protective layer located on the back of the flexible board, and then stick the LED strip around the perimeter of the oval. Pass the wire through the pre-made hole in the bottom (read above).

  1. This hole must be used to pass the power cable coming from the source (distribution panel, outlet, etc.).
  2. Use a regular nylon tie to tie the wires together.
  3. The transistor connection diagram can be found on the Internet - it is as simple as possible. Unfortunately, you can’t do without the basics of electrical engineering here.
  4. Solder the wires to the photocell and use heat shrink tubing to improve the insulation.
  5. Solder the wires from the power cable to the working board.
  6. It is recommended to attach the board to the lamp using Velcro or other quick-release elements.
  7. Place the photo sensor in the pre-made hole and secure it with glue.

Hang the finished device in the room where you plan to use it and enjoy the result. Using a switching power supply, you will protect yourself and avoid unnecessary expenses: when the night light is turned off, but the power supply is plugged in, the latter will consume virtually no electricity.

LED night light from an old electrical plug

Another simple night light that you can make with your own hands is made from a regular electrical plug. Of course, unlike the “porridge from an axe”, you won’t be able to create a lamp from one plug, so you will need LEDs, two resistor elements, two capacitors, a zener diode and polyvinyl chloride tubes. The latter will be necessary to insulate the wires and prevent short circuits.

Inspect the plug and remove the grounding pins. Remove the clamp, then grind down the rim on the LED using a file.

The connection diagram for electrical elements is similar to the use of a fumigator (a device that is plugged into an outlet with a “pill” to repel mosquitoes and flies). The device is disassembled, the heating element is removed, and an LED is mounted in the free space. The voltage from the mains supply is supplied through the capacitor. Excess voltage acts on the rectifier bridge, and a resistance and a capacitor are activated at the output, smoothing out the ripple. The mains voltage should be about 400 V.

In this case, instead of a fumigator, an electric plug is used. The finished diagram is placed inside the lampshade, the shape of which can be arbitrary. The lampshade is created independently or purchased in a store (usually plastic or glass products). You can cut out the frame of the night light from wood, covering the top with a protective layer of special varnish and impregnation that prevents the appearance of fungus or mold and rotting.

In this case we are talking about decorating the device. You can choose any of the options described above as an electronic circuit. Plywood is a natural and environmentally friendly material, easy to process. Using a manual or electric jigsaw, you can easily give it the desired shape.

In the process of making such a lamp, you may need a jigsaw, drill, glue, nails, hammer and pencil or other stationery item for marking.

The finished products are mounted on the wall, and the luminous elements are located between the wall and a sheet of plywood of the selected shape. Cut out an image of a cat from plywood and hang the finished lamp on the wall. It looks simply gorgeous and is much more original than the lighting fixtures sold in stores.

To create a “home zoo” from night lights, you need a template of an animal, stars and other objects, which will have to be printed on a large sheet of paper. Cut it along the contour, acting as carefully as possible. It is advisable to print on an A3 sheet, but an A4 version may work if you are making a small lamp.

Attach the drawing to the plywood and trace it along the outline with a pencil or marker. Next, you need to cut out the resulting shape and attach an LED strip to the back. Find the conditional center of the cut out figure where you need to attach the board. This will create a night light with an even glow in all directions. For fastening, an adhesive layer hidden under the protective film on the back of the LED strip will be sufficient.

Now you need to think about attaching the lamp to the wall. To get the best result and avoid a situation where the light practically does not extend beyond the boundaries of the plywood figure, the night light should not lie close to the wall. Glue a wooden block to it or screw it with self-tapping screws and build a fastening element on it (for example, an “eye” by which the device can be hung on a dowel sticking out of the wall).

Please note that you can cut out several identical figures, make night lights out of them, but place them at different angles.

This option involves cutting out a metric from plywood with the name of a child, spouse, etc. If you want a more original lighting fixture, try creating a multi-level lamp from plywood by cutting out various shapes and placing them on top of each other due to the difference in dimensions. If the size of such a device is large, then instead of an LED strip it would be rational to use a LED lamp.

Do not use incandescent or halogen lamps for plywood, wood and paper night lights. They have excessively high heating temperatures, which increases the level of fire hazard.

Homemade product from a faulty fumigator

This method was partially described above, but let's look at it in more detail. To make such a night light you will need:

  • fumigator - so as not to feel sorry for it, take the device that is out of order;
  • two capacitors;
  • resistor;
  • diodes for rectifier bridge;
  • two white LEDs (although the glow and color temperature are selected individually, in accordance with the preferences of each consumer).

The sequence of actions is as simple as possible: the fumigator body is disassembled, the heating element is removed and LEDs are mounted in its place.

The operating principle of the resulting lamp is as follows: the mains voltage is supplied to the capacitor. The reactance of the device interacts with the excess voltage and goes to a rectifier bridge consisting of KD209 diodes. The output voltage from the rectifier bridge activates the load resistor, while the second capacitor is responsible for smoothing out the ripple.

The resulting DC voltage powers the white diodes through a capacitor. The voltage on the first capacitor must be at least 400 V. This is important to consider when building a rectifier bridge from diodes. The total number of LEDs varies depending on the desired end result. Regardless of the choice, the connection diagram remains the same.

Phone charger as a power supply

Almost every person has an old mobile phone charger lying around their house. Perhaps this power supply is faulty or is simply lying around unnecessarily.

Inspect the charger and determine its power. Let's assume that this parameter is 6 W. Using Ohm's law, calculate the resistance of the required current limiting resistors depending on the LEDs used. The maximum current passing through the LED should not exceed 20 mA.

If the voltage of the selected diodes is the same, then they can be connected through one resistor. The light will still be inhomogeneous, but such differences are insignificant and invisible to the human eye. After completing the assembly, fix the parts with superglue and install them in the center of the ceiling, next to the chandelier.

During the day, the lighting device will be invisible, but at night it will delight you with dim light, sufficient to ensure that the room is not as dark and gloomy as children imagine it to be. The power of the finished lamp will be 7 W, so electricity consumption will be minimal.

Thus, for a homemade night light, you can take the body of any electrical device that has failed. This is one of the main advantages of creating lamps with your own hands. Larger lighting fixtures are made from powerful LED bulbs or single pieces of flexible tape.

The choice of materials, step-by-step process and power of LED devices depends on the desired end result. The main difficulties are associated with soldering the electronic circuit, and decorating the device, for example, using plywood, is not difficult.

Many people associate this idea with the New Year, because at this time there are a lot of light bulbs, lights and garlands around. To make such a night light you will need a minimum amount of materials. Just a beautiful glass jar and a garland.

You can also use additional materials to create decor, but a night light in the style of minimalism is more relevant due to the trend of this style in fashion now. So, you need to put the garland in a jar and enjoy the beautiful sight. To make the lamp look more impressive, you can place several jars with lights nearby.

Night light with infinity effect

Such lamps can be found in the store, but we will create them with our own hands. For this you will need:

  • Acrylic mirror,
  • translucent glass panel,
  • strip with LED inserts,
  • aluminum strip,
  • wooden plank.

Manufacturing plan:

  1. Make grooves in a block of wood for the mirror and glass panels using special tools.
  2. The aluminum strip must be folded in the shape of a rectangle and secured to the block using bolts between the cuts made earlier.
  3. Wrap the aluminum strip with LED strip using glue or wire.
  4. Insert the mirror and glass panel into the recesses.

Night light - cloud

This lamp is an excellent decor for a small child’s nursery. You just need to take a lamp with a round, oval lampshade and cover it with cotton wool or other fluffiness in the form of a large cloud. The cloud should hang in the air, so you first need to thread a thick thread through the inside of the structure.

LED night light

Such a night light can be made from any material, because diode light bulbs are completely safe (they do not heat up, unlike other light elements). This option is suitable for avid crafters and needlewomen. After all, there is room for your imagination to run wild. Anything, there would be a desire! The LED night light can be made into a wall-mounted or reverse wall-mounted version.

An LED wall night light is made from a straight piece of dense material and the diode strip itself. The base material can be beer cardboard, a thin, not heavy wooden board, and so on. You need to cut out any shape from this material (cats, flowers, butterflies...) and attach an LED strip to the back side. The finished structure can be attached to the wall.

Night light creating stars on the ceiling

This idea of ​​a night light has flashed everywhere: in films, on TV, and so on. No wonder. A night light that creates stars on your ceiling attracts people's attention and makes the room feel magical and cozy. Such a night light will not only create a cozy atmosphere in the room, but will also give pleasant, unforgettable emotions of magic and joy to the child. To make such a night light you will need:

  • Small glass jar with lid,
  • Thick kitchen foil,
  • Felt pen, marker,
  • Scissors and awl,
  • Board or any other hard surface

Manufacturing sequence:

  • Use a marker to transfer the stars onto the foil.
  • Place the foil on a hard surface and make holes with an awl, needle,
  • Now move the sheet of foil into the jar, pressing it tightly against the walls. You should get a jar with an inner layer of foil walls.
  • Place a lantern, or maybe a garland, inside the jar, and close the jar with a lid. Turn the structure upside down.

Paper night light

This version of the product is simple to implement, but requires great care and perseverance. Paper is a pleasant material for needlework. You can make a beautiful night light out of it. To work, you will need thick paper, a stationery knife or awl, and any object that emits light. You just need to create neat holes in the form of some kind of pattern and roll the paper into a cylinder, placing the “light” inside.

Having looked at all kinds of handmade night lights, we can conclude that making beautiful, practical room decor is a pleasant pastime for creative people.

Anyone can create their own night light if they wish. This may seem like a very labor-intensive process, but creating your own decorative element will bring a lot of benefits, subsequently aesthetic pleasure and comfort.

Create beautiful masterpieces of home lighting and delight your loved ones!

Today, the market can provide a huge selection of various types of lighting, including all kinds of night lights. Their diversity is simply amazing. A night light can create a pleasant atmosphere in a room and allow you to navigate at night without any problems. They are usually installed in children's rooms to create fabulousness and magic. This atmosphere helps the child not be afraid of the dark. Such a miracle, of course, can be bought in any store, but it will be better if you simply make it yourself.

How to make a night light with your own hands from scrap materials

Making your own night light is an original idea of ​​your imagination and a decoration for your room design. Anyone can make such a light source at home; you just have to use a little imagination and your room will be filled with pleasant and unusual light.

A made-made, not store-bought, night lamp will delight you with its uniqueness and beauty. And also such a device, made with love, will create warmth and comfort in your home.

You can create homemade lamps from various available tools and materials. Anything that comes to hand will do, and your imagination will help you create a miracle lamp. It can be any shape and size you want.

Material from which you can make a night light:

  • Trees;
  • Plywood;
  • Papers;
  • Capron;
  • Disks.

You can also make a night lamp from: an ordinary glass jar, a garland, a broken charger, a plastic bottle, and even any cardboard box will do. All these accessories can be found in every home and can be used to make an original night light that will delight you with its unusualness and charm.

Decorative night light made of wood: the materials needed for it

A night lamp can be created from any material that you find at home. Ideas for creating a night light can be very different. One of them is a wonderful night light made of wood. It is very easy and simple to make such an unusual lamp and you will not need a lot of material at all.

This decorative lamp will decorate and transform your room. You can also give it to your loved ones and friends, delighting them with such an unusual gift.

To create such a miracle you will need some tools: a drill press and a band saw. As well as a small amount of material and accessories: glue, logs, varnish, tapes with LED bulbs and sandpaper. Having collected all this, you can begin to create a masterpiece.

Progress:

  • First of all, we cut out small circles from the log. Two of them should be larger than the others.
  • Now we measure the center of the wheels and drill small holes of the required diameter. In the two large ones they should be deaf.
  • To rid the workpieces of roughness and irregularities, you need to treat them with sandpaper.
  • The drilled holes must be carefully coated with glue.
  • After the glue has dried, we open the wheels with varnish.
  • We put wheels on a pre-prepared rail and fasten it LED strip.

So we have made an interesting night light that can be installed in any room of your home or given to your friends. Such a beautiful lamp will delight residents for a long time. Homemade wooden lamps are environmentally friendly devices that can be installed even in children's rooms.

Making a starry sky with your own hands: step-by-step instructions

The night light, which represents a beautiful starry sky, will appeal not only to children, but also to adults. It is usually created from scrap materials found at home. Moreover, it will not need to be connected to the electrical network. And it will glow from a small battery-powered flashlight.

Such a starry sky, of course, can be purchased at any store, however, a home-made night light will give you greater pleasure. Such a night light, today, decorates every child’s room.

So, to create such splendor you will need: an ordinary glass jar that is screwed on with an iron lid, a small flashlight, thick foil, a hard surface (tray), scissors and an awl. All these items can be found at home.

Step-by-step instruction:

  • A diagram of the starry sky is drawn on the foil. The original drawing, of course, will not work out, but a copy should come out.
  • On the drawn diagram of the sky we make holes (stars) with an awl.
  • Cut to the shape and size of the jar, we insert the sheet inside very carefully.
  • Place the flashlight on the bottom of the prepared jar and turn it on.

Now, those who are interested in space will be able to admire it at home. Wait until dark and enjoy, any star is now under your control. This model of the starry sky can also decorate a New Year’s party for children.

Beautiful DIY LED night light: its positive qualities

Making an adorable LED night light yourself is not that difficult. In this case, only the presence of LEDs is required. Such night lights can be made of any size; for example, the smallest ones can be decorated with a decorative lampshade or lampshade. There are even photo shoots where you can present your best work in the form of a night light.

LED night lights are made very often today and from just about anything. This type of lamp is very popular because of its luminous element - LED. Making such a night light would be the right and rational decision.

This type of night light can be made from a damaged fumigator, a broken charger, even any diode element or projector will come in handy. LED has a number of characteristic advantages, which makes it so popular.


Advantages of LED:

  • Availability;
  • Long service life;
  • High-quality glow;
  • Energy saving work;
  • Does not heat up;
  • Has many application schemes.

To properly assemble such an LED night light, you first need to correctly solder its electrical circuit. Any electrical device can be used as a housing. A table lamp today is a completely irrational purchase. It is best to create or purchase lamps with LED lamps.

DIY children's night light: a variety of options

Most children are afraid to sleep if there is no light. This problem can be solved if you purchase a lighting device for your baby that will not burn very brightly, but it will be enough for the child. Today, special devices such as night lights have become relevant.

Such light sources can be purchased at the store, but it is better to make them yourself. By making a night light with your child, you will thereby make all his wishes come true, and he will be able to enjoy the whole process.

By making such a device together with your child, you will not only save money, but also create something completely new, delight the child, thereby showing his creativity. A children's night light can be made in various versions and any materials can be used.

Variety of night lamps:

  • Starry sky;
  • Cloud;
  • LEDs in a bottle;
  • Lace night light;
  • Lamp with butterflies.

By making one of the above night lights, you will not only be able to decorate the nursery, but also transform the bedroom or even the living room. This lamp will add romanticism and sophistication to you.

How to make a night light with your own hands (video)

Today, a different source of light is the most important and integral part of life for us. With them our existence becomes more beautiful and more fun. They bring not only beauty, but also warmth and comfort to our home. Any interior of a house or apartment is complemented by chandeliers, lamps and lamps.