Arrangement
Cylinder filler: what is this profession? The content of the activity of the cylinder filler of the 4th category.

Cylinder filler: what is this profession? The content of the activity of the cylinder filler of the 4th category.

The issue was approved by the Decree of the State Committee of the USSR on Labor and Social Affairs and the Secretariat of the All-Union Central Council of Trade Unions dated January 31, 1985 N 31 / 3-30
(as edited by:
Decrees of the USSR State Committee for Labor, the Secretariat of the All-Union Central Council of Trade Unions dated 12.10.1987 N 618 / 28-99, dated 18.12.1989 N 416 / 25-35, dated 15.05.1990 N 195 / 7-72, dated 22.06.1990 N 248 / 10-28,
Decrees of the State Committee for Labor of the USSR 12/18/1990 N 451,
Decrees of the Ministry of Labor of the Russian Federation of December 24, 1992 N 60, of February 11, 1993 N 23, of July 19, 1993 N 140, of June 29, 1995 N 36, of June 1, 1998 N 20, of May 17, 2001 N 40,
Orders of the Ministry of Health and Social Development of the Russian Federation of July 31, 2007 N 497, of October 20, 2008 N 577, of April 17, 2009 N 199)

Cylinder filler

§ 229 Cylinder filler (2nd category)

Job Description. Filling under a given pressure of cylinders with gases or chemicals on a filling ramp. Maintenance of communications and ramp fittings. Delivery and connection to the filling ramp of cylinders for filling. Control of the degree of filling, as well as the pressure on the ramp according to the instruments. Regulation of the operation of automatic devices for filling cylinders with liquefied and compressed gas. Checking the condition of self-closing valves. Participation in the current repair of pipeline equipment, fittings for oxygen and filling plants. Shutdown and rollback of filled cylinders from the ramp, their transportation and storage. Coloring and branding of cylinders depending on the classification of gases and chemicals. Maintain documentation for filling cylinders. Checking and filling out passports for cylinders.

Must know: basic information about the technological process of obtaining gases or chemical substances under pressure; the principle of operation of the filling ramp; layout of shut-off and control valves, safety devices and pipelines; colors of cylinders depending on the composition of the gas or chemicals; methods for determining and eliminating gas leakage and the appearance of water in pipelines; rules for handling pressurized cylinders during their filling, transportation and storage; purpose and conditions for the use of instrumentation.

§ 230. Cylinder filler (3rd category)

Job Description. Filling cylinders with oxygen or other gas at stations and special installations. Filling cylinders with liquid chlorine, hydrogen fluoride, freon. Submission of cylinders to the station and their installation for filling. Control of the degree of filling of cylinders. Regulation of the operation of automatic devices for filling cylinders at stations and installations. Supply of oxygen through the pipeline. Current repair of the filling ramp, pipelines, fittings and cylinders.

Must know: technological process for producing gases or chemicals under pressure; installation of a filling ramp, stations and installations for filling cylinders; rules for connecting and filling cylinders at stations and installations; instrumentation device.

§ 231 Cylinder filler (4th category)

Job Description. Filling car cylinders with compressed natural gas at gas filling columns of a gas filling compressor station. Inspection and rejection of gas cylinders. Check for tightness of connections of pipelines, hoses, shut-off and safety valves of a gas filling column. Control of the degree of filling of automobile cylinders by gas pressure at the gas station and in automobile cylinders. Checking the operation of instrumentation and signaling equipment when filling car cylinders with compressed gas. Transfer to the dispatcher of data on pressure and temperature of gas in the cylinders of the car. Checking the serviceability of the safety valves of gas stations and cars. Participation in the current repair of gas stations.

Must know: installation of gas filling columns; technology for the production of compressed natural gas at an automobile gas-filling compressor station; physical and chemical properties of natural gas; device and characteristics of automobile cylinders of various types; rules and regulations for filling car cylinders with compressed natural gas; the procedure and form of accounting for the supplied gas; rules for registering serviced vehicles; device and rules for the use of instrumentation and automation; rules for the safe operation of the serviced equipment.

Cylinder filler 2nd category

Job Description.

1. Filling under a given pressure of cylinders with gases or chemicals on a filling ramp.
2. Maintenance of communications and ramp fittings.
3. Delivery and connection to the filling ramp of cylinders for filling.
4. Control of the degree of filling, as well as the pressure on the rail according to the instruments.
5. Regulation of the operation of automatic devices for filling cylinders with liquefied and compressed gas.
6. Checking the condition of self-closing valves.
7. Participation in the current repair of pipeline equipment, fittings for oxygen and filling plants.
8. Shutdown and rollback of filled cylinders from the ramp, their transportation and storage.
9. Coloring and branding of cylinders depending on the classification of gases and chemicals.
10. Documentation for filling cylinders.
11. Checking and filling out passports for cylinders.

Must know:

Basic information about the technological process for producing gases or chemicals under pressure;
- the principle of operation of the filling ramp;
- diagrams of the location of shut-off and control valves, safety devices and pipelines;
- colors of cylinders depending on the composition of the gas or chemicals;
- methods for determining and eliminating gas leakage and the appearance of water in pipelines;
- rules for handling pressurized cylinders during their filling, transportation and storage;
- purpose and conditions for the use of instrumentation.

Cylinder filler 3rd category

Job Description.

1. Filling cylinders with oxygen or other gas at stations and special installations.
2. Filling cylinders with liquid chlorine, hydrogen fluoride, freon.
3. Submission of cylinders to the station and their installation for filling.
4. Control of the degree of filling of the cylinders.
5. Regulation of the operation of automatic devices for filling cylinders at stations and installations.
6. Oxygen supply through the pipeline.
7. Current repair of the filling ramp, pipelines, fittings and cylinders.

Must know:

Technological process for producing gases or chemicals under pressure;
- arrangement of a filling ramp, stations and installations for filling cylinders;
- rules for connecting and filling cylinders at stations and installations;
- the device of control and measuring devices.

Cylinder filler 4th category

Job Description.

1. Filling car cylinders with compressed natural gas at gas filling columns of a gas filling compressor station.
2. Inspection and rejection of gas cylinders.
3. Check for tightness of the connections of pipelines, hoses, shut-off and safety valves of the gas filling column.
4. Control of the degree of filling of automobile cylinders by gas pressure at the gas station and in automobile cylinders.
5. Checking the operation of instrumentation and signaling devices when filling car cylinders with compressed gas.
6. Transfer to the dispatcher of data on pressure and temperature of gas in the cylinders of the car.
7. Checking the serviceability of the safety valves of gas stations and cars.
8. Participation in the current repair of gas stations.

Must know:

The device of gas filling columns;
- technology for the production of compressed natural gas at an automobile gas-filling compressor station;
- physical and chemical properties of natural gas;
- device and characteristics of automobile cylinders of various types;
- Rules and norms for filling car cylinders with compressed natural gas;
- the procedure and form of accounting for the released gas;
- rules for registration of serviced vehicles;
- device and rules for the use of instrumentation and automation;
- rules for the safe operation of the serviced equipment.

News

Coordination of railway training programs

The requirements for professions that determine professional standards and the development of technologies are constantly changing, in connection with this, the process of changing, adjusting and updating curricula, in particular for railway professions, is constantly going on. Last week we received learning programs, agreed and approved by the Ministry of Transport and the Federal Agency for Railway Transport by profession:

Learning to operate a railway crane

Last week, the theoretical training of a railway crane operator was completed. It was the railway crane operators who studied, taking into account all the specifics: shunting, signaling and safety rules on the railway ... The course focused on cranes KDE-251 and KZhDE-25, as well as EDK-1000/2 with increased load capacity up to 125 tons.

On the next week the trainees will go to our training ground, where they will put into practice their theoretical knowledge under the guidance of experienced instructors.

Introduction to oil and gas production

Where does oil come from? How is it mined and what is it processed into? How are drilling rigs built, drilled and completed wells?

All this was discussed at the course "Introduction to oil and gas production", which was held by specialists from the oil and gas division of PromResurs last week.

Although the course has ended, we will be happy to repeat it for you.

The course will be useful to you if:

We studied: Training of galvanizers

There are a little more people who have mastered a qualified specialty, Hooray!

Our specialists conducted another training for the employees of the electroplating shop with the organization of theoretical and practical classes. In the course of practical exercises, work was carried out to cover parts of complex shapes.

Now electroplating will be able to independently perform the declared work, and the company will not spend invaluable time on their training in the process of working on productive parts and will reduce the level of defects in their production.

We are waiting for everyone who has not completed the training yet!

Recruitment of the Railway Crane Operator group in July

Friends, at the end of July, training in the profession of "Railway Crane Operator" will begin.

Training will consist of 2 parts: Theoretical and Practical.

The theoretical part is held from July 31 to August 18, 2017. The training will cover topics such as crane construction, operation, loading and unloading, railway signaling and the basics of maneuvering.

Signalman on the tracks of Russian Railways

Railway specialists training center"PromResurs" has adjusted the training program for the profession "Signalist" in accordance with the requirements of Russian Railways. In particular, the requirements of the instructions on labor protection and the job requirements of the signalman, approved regulations RUSSIAN RAILWAYS. Also, as part of the training, the mastering of the profession "Road Technician" is carried out - a mandatory requirement when working as a signalman on public tracks.

Buy a license - what's behind it?

Very often you can find ads with a screaming headline “Buy a certificate”, “Buy a crust”, “Buy a certificate”. And this is not about buying the certificate forms themselves, but about selling a ready-made certificate in your name, which confirms the qualifications. They offer to buy everything, from a labor protection certificate, fire safety, and ending with working professions, such as a slinger, a turner, etc.

Even having a license does not speak about the quality of education! Talking about the quality of education.

Gas cylinders are one of the important materials, they are used both in production and in construction, so the cylinder filler is a rather demanded profession. The cylinder filler fills the tanks with natural gas and checks them. The filling specialist is directly responsible for the safety of the cylinders.

Qualification ranks

The cylinder filler specialty has several ranks, the lowest is the 2nd rank, the highest is the 4th.

Training program

Cylinder filler training includes knowledge of:

The meanings of the colors of the cylinders depending on the composition of the gas inside
Types of leaks and ways to prevent them
Rules for the operation of filled cylinders
Fundamentals of labor safety and environmental protection

Frequency of training

Training of the cylinder filler is carried out at the request of the specialist himself, no more than once a year.

What form does the training take?

Training takes place in remote form without interrupting production. After training, it is obligatory to give testing based on the data obtained. If the student successfully passes the exam, the student receives the documents by mail at the place of residence.

Job Description. Filling under a given pressure of cylinders with gases or chemicals on the filling ramp. Maintenance of communications and fittings of the ramp. Delivery and connection to the filling ramp of cylinders for filling. Control of the degree of filling, as well as the pressure on the rail according to the instruments. Regulation of the operation of automatic devices for filling cylinders with liquefied and compressed gas. Checking the condition of self-closing valves. Participation in the current repair of pipeline equipment, fittings for oxygen and filling plants. Disconnection and rollback of filled cylinders from the ramp, their transportation and storage. Coloring and branding of cylinders depending on the classification of gases and chemicals. Maintain documentation for filling cylinders. Checking and filling out passports for cylinders.

Must know: basic information about the technological process of obtaining gases or chemicals under pressure; principle of operation of the filling ramp; layout diagrams of shut-off and control valves, safety devices and pipelines; colors of cylinders depending on the composition of the gas or chemicals; methods for determining and eliminating gas leakage and the appearance of water in pipelines; rules for handling pressurized cylinders during their filling, transportation and storage; purpose and conditions for the use of instrumentation.

§ 230. Cylinder filler (3rd category)

Job Description. Filling cylinders with oxygen or other gas at stations and special installations. Filling cylinders with liquid chlorine, hydrogen fluoride, freon. Supply of cylinders at the station and their installation for filling. Control of the degree of filling of cylinders. Regulation of the operation of automatic devices for filling cylinders at stations and installations. Supply of oxygen through the pipeline. Current repair of the filling ramp, pipelines, fittings and cylinders.

§ 231 Cylinder filler (4th category)

Job Description. Filling car cylinders with compressed natural gas at gas filling columns of a gas filling compressor station. Inspection and rejection of gas cylinders. Checking the tightness of the connections of pipelines, hoses, shut-off and safety valves of the gas filling column. Monitoring the degree of filling of automobile cylinders by gas pressure at the gas filling station and in automobile cylinders. Checking the operation of instrumentation and signaling equipment when filling automobile cylinders with compressed gas. Transferring data to the dispatcher on suppression and gas temperature in the car cylinders. Checking the serviceability of safety valves of gas stations and cars. Participation in the current repair of gas stations.

Must know: installation of gas filling columns; technology for the production of compressed natural gas at an automobile gas filling compressor station; physical and chemical properties of natural gas; device and characteristics of automobile cylinders of various types; rules and norms for filling automobile cylinders with compressed natural gas; the procedure and form of accounting for the supplied gas; rules for registering serviced vehicles; device and rules for the use of instrumentation and automation; rules for the safe operation of serviced equipment.

I approve _______________________________ (initials, surname) _________________________________ _______________________________ (name of employer, (head or other person, _________________________________ _______________________________ its organizational and legal authority to approve _________________________________ _______________________________ form, address, phone number, job description address) _________________________________ e-mail, OGRN, TIN / KPP) " __"___________ ____"__"___________ ____ N _______ M.P.

JOB INSTRUCTION for cylinder filler 2 (3, 4) category _________________________________________________ (name of the employer's department)

_________________________

ID of the electronic copy of the document.

PREAMBLE

This job description has been developed and approved in accordance with the provisions of the Labor Code Russian Federation and other normative acts regulating labor relations.

1. GENERAL PROVISIONS

1.2. This job description defines the functional duties, rights and responsibilities of the Employee when performing work in the specialty and directly at the workplace in "____________" (hereinafter referred to as the "Employer").

1.3. The employee is appointed to the position and dismissed from the position in accordance with the procedure established by the current labor legislation by order of the Employer.

1.4. The employee reports directly to _____________________.

1.5. Qualification requirements: _______________ education without presenting requirements for experience.

1.6. The employee must know:

1st category

Basic information about the technological process for producing gases or chemicals under pressure; the principle of operation of the filling ramp; layout of shut-off and control valves, safety devices and pipelines; colors of cylinders depending on the composition of the gas or chemicals; methods for determining and eliminating gas leakage and the appearance of water in pipelines; rules for handling pressurized cylinders during their filling, transportation and storage; purpose and conditions for the use of instrumentation.

(3rd category

Technological process for producing gases or chemicals under pressure; installation of a filling ramp, stations and installations for filling cylinders; rules for connecting and filling cylinders at stations and installations; instrumentation device.

4th category

The device of gas filling columns; technology for the production of compressed natural gas at an automobile gas-filling compressor station; physical and chemical properties of natural gas; device and characteristics of automobile cylinders of various types; rules and regulations for filling car cylinders with compressed natural gas; the procedure and form of accounting for the supplied gas; rules for registering serviced vehicles; device and rules for the use of instrumentation and automation; rules for the safe operation of the serviced equipment.)

1.7. During the period of temporary absence of the Employee, his duties are assigned to _______________ (position).

2. FUNCTIONAL DUTIES OF THE EMPLOYEE

1st category

Filling under a given pressure of cylinders with gases or chemicals on a filling ramp. Maintenance of communications and ramp fittings. Delivery and connection to the filling ramp of cylinders for filling. Control of the degree of filling, as well as the pressure on the ramp according to the instruments. Regulation of the operation of automatic devices for filling cylinders with liquefied and compressed gas. Checking the condition of self-closing valves. Participation in the current repair of pipeline equipment, fittings for oxygen and filling plants. Shutdown and rollback of filled cylinders from the ramp, their transportation and storage. Coloring and branding of cylinders depending on the classification of gases and chemicals. Maintain documentation for filling cylinders. Checking and filling out passports for cylinders.

(3rd category

Filling cylinders with oxygen or other gas at stations and special installations. Filling cylinders with liquid chlorine, hydrogen fluoride, freon. Submission of cylinders to the station and their installation for filling. Control of the degree of filling of cylinders. Regulation of the operation of automatic devices for filling cylinders at stations and installations. Supply of oxygen through the pipeline. Current repair of the filling ramp, pipelines, fittings and cylinders.

4th category

Filling car cylinders with compressed natural gas at gas filling columns of a gas filling compressor station. Inspection and rejection of gas cylinders. Check for tightness of connections of pipelines, hoses, shut-off and safety valves of a gas filling column. Control of the degree of filling of automobile cylinders by gas pressure at the gas station and in automobile cylinders. Checking the operation of instrumentation and signaling equipment when filling car cylinders with compressed gas. Transfer to the dispatcher of data on pressure and temperature of gas in the cylinders of the car. Checking the serviceability of the safety valves of gas stations and cars. Participation in the current repair of gas stations.)

3. RIGHTS OF THE EMPLOYEE

The employee has the right to:

providing him with a job stipulated by an employment contract;

a workplace that meets the state regulatory requirements for labor protection and the conditions provided for by the collective agreement;

full reliable information about working conditions and labor protection requirements at the workplace;

vocational training, retraining and advanced training in the manner prescribed by the Labor Code of the Russian Federation, other federal laws;

obtaining materials and documents related to the issues of their activities;

interaction with other divisions of the Employer to resolve operational issues of their professional activities.

4. RESPONSIBILITY

The employee is responsible for:

4.1. Failure to fulfill their functional duties.

4.2. Inaccurate information about the status of the work.

4.3. Failure to comply with orders, instructions and instructions of the Employer.

4.4. Violation of safety regulations and labor protection instructions.

Failure to take measures to suppress the identified violations of safety regulations, fire safety and other rules that pose a threat to the activities of the Employer and his employees.

4.5. Failure to comply with labor discipline.

5. WORKING CONDITIONS

5.1. The work schedule of the Employee is determined in accordance with the Internal Labor Regulations established by the Employer.

5.2. In accordance with _______________, the Employer evaluates the effectiveness of the Employee's activities. The set of measures for evaluating the effectiveness was approved by _______________ and includes:

- __________________________;

- __________________________.

Job description developed on the basis of _______________________ ________________________________________________________________________________. (name, number and date of the document) Head of the structural unit _____________________________ _____________________ (initials, surname) (signature)"__"___________ ____ d. familiarized with the instruction: (or: received the instruction) _____________________________ _____________________ (initials, surname) (signature) "__" ___________ ____

BY APPLYING ONLINE FOR LEGAL SERVICES RIGHT NOW, YOU WILL GET A 10% DISCOUNT

I approve _______________________________ (initials, surname) _________________________________ _______________________________ (name of employer, (head or other person, _________________________________ _______________________________ its organizational and legal authority to approve _________________________________ _______________________________ form, address, phone number, job description address) _________________________________ e-mail, OGRN, TIN / KPP) " __ "___________ ____"__"___________ ____ N _______ M.P.

JOB INSTRUCTION for cylinder filler 2 (3, 4) category _________________________________________________ (name of the employer's department)

_________________________

ID of the electronic copy of the document.

PREAMBLE

This job description has been developed and approved in accordance with the provisions of the Labor Code of the Russian Federation and other regulations governing labor relations.

1. GENERAL PROVISIONS

1.3. The employee is appointed to the position and dismissed from the position in accordance with the procedure established by the current labor legislation by order of the Employer.

1.4. The employee reports directly to _____________________.

1.5. Qualification requirements: _______________ education without presenting requirements for experience.

1.6. The employee must know:

1st category

(3rd category

4th category

1.7. During the period of temporary absence of the Employee, his duties are assigned to _______________ (position).

2. FUNCTIONAL DUTIES OF THE EMPLOYEE

1st category

(3rd category

4th category

3. RIGHTS OF THE EMPLOYEE

The employee has the right to:

providing him with a job stipulated by an employment contract;

a workplace that meets the state regulatory requirements for labor protection and the conditions provided for by the collective agreement;

full reliable information about working conditions and labor protection requirements at the workplace;

vocational training, retraining and advanced training in the manner prescribed by the Labor Code of the Russian Federation, other federal laws;

obtaining materials and documents related to the issues of their activities;

interaction with other divisions of the Employer to resolve operational issues of their professional activities.

4. RESPONSIBILITY

The employee is responsible for:

4.1. Failure to fulfill their functional duties.

4.2. Inaccurate information about the status of the work.

4.3. Failure to comply with orders, instructions and instructions of the Employer.

4.4. Violation of safety regulations and labor protection instructions.

Failure to take measures to suppress the identified violations of safety regulations, fire safety and other rules that pose a threat to the activities of the Employer and his employees.

4.5. Failure to comply with labor discipline.

5. WORKING CONDITIONS

5.1. The work schedule of the Employee is determined in accordance with the Internal Labor Regulations established by the Employer.

- __________________________;

- __________________________.

The job description was developed on the basis of ______________________________ ________________________________________________________________________________. (name, number and date of the document) Head of the structural unit _____________________________ _____________________ (initials, surname) (signature) "__" ___________ ____ d. familiarized with the instruction: (or: received the instruction) _____________________________ _____________________ (initials, surname) (signature) "__" ___________ ____