Why the laptop does not see the iPhone 4. Why the computer does not see the iPhone via usb

How to connect iPhone to computer via USB? Step-by-step instruction

iPhones are getting more than just fans: it's fashionable, practical, not stylish. But since the information storage place that is placed in such a gadget is not dimensionless, when the question arises of how to place the accumulated data: photos, videos, not other files that are a pity to delete. One way to store media files from an iPhone is to move the information to a computer hard drive. But here the following question arises: is it possible to connect an iPhone to a computer? The answer is obvious: what, there is an option. Moreover, there are practically no difficulties in this procedure. In order to complete the steps correctly for our client, you need to study in detail basic knowledge how to connect an iPhone to a computer via USB.

Basic knowledge of connecting this device to a computer

This method of transferring information is quite simple regarding the execution of operations, the process takes place at a high speed and does not allow you to simultaneously charge the device.

What is the purpose of such a connection?


How is data transferred?

The iPhone comes with a USB cable. This is not an adapter that will help you synchronize your device with a PC. It is equipped with a standard USB connector, on the other hand, a special connector for the device. Based on the model, they differ. Deciding how iPhone connect to the computer via USB, it is important to consider that the presence of a USB connector version 3.2.0 on the computer is essential. Where does the snag appear? What exists is that your view of USB version 5.0 is absolutely identical to the previous version 1.0. If you connect the device to USB 1.0, the computer will display a message that the device is running faster. This will mean that, for sure, it is impossible to transfer data from the device to the hard disk. However, it is harmful to be scared, connector 1.0. used only on older models, which are already quite problematic to find.

Data transfer algorithm

How to connect iPhone to computer via USB? Use the step by step guide.

  1. Connect the USB cable to the computer.
  2. Connect the other end of the wire to the device.
  3. Open the "My Computer" tab on the monitor's desktop
  4. In the folder that opens, find the shortcut to the digital camera.
  5. Double click on the label. In this case, the contents of the iPhone should open.
  6. Subsequently, you can copy folders from the device to the hard disk by dragging them with the mouse to the specified address on the hard disk. You can right-click, select the "Send To" line and specify the location where you want to move the selected media files.

After executing this algorithm, the question of how iPhone connect to a computer via USB, should not occur. However, it may turn out that the USB version is correct, the connection is also correct, but there is no connection. What is possibly the problem? The iTunes program ("iTunes") can help solve the problem.

Useful problem solving software

iTunes for iPhone – a free application that you will not find download on the internet. This app helps you sync your iOS device with PC. In addition, when downloading the utility, you install basic drivers with it, which will simplify the work with the gadget. Specifically speaking, the application helps to synchronize contacts, install games, download media files, books, and many other useful programs.

Why is the computer not sees iPhone via USB? ten reasons

Here is the text version of the tutorial: iphone.html Hello everyone.

If iTunes for iPhone is installed on the computer, then when connected via a USB cable, synchronization should occur quickly and automatically. There is an important point: if data is being transferred, in no case should you pull out the cord. Such interruption of work can negatively affect the file system of the device. If you need to pause the file transfer, you just need to drag the slide, cancel the sync, select safe eject, then unplug the cable.

Sometimes it may be that even after installing iTunes, the computer may not see the iOS device. In most cases, such a nuisance occurs after a new firmware of an "apple" friend or after a PC update. To resolve this issue, do the following.

  1. Install the latest version of iOS.
  2. Connect the iFunBox file manager or iExplorer, which is identical in capabilities.
  3. Use this program to find the var/mobile/Media section.
  4. Copy it to a computer and then remove it from the gadget.
  5. Restart iPhone.
  6. Make a connection to a PC.
  7. All is ready. If some of the files disappeared after connecting, they can be found in the copied Media folder.

Additional features

Sometimes, especially at work, there may be a need to connect your “bitten apple” to a computer, and the employer may prohibit installing additional applications on the PC, and Wi-Fi is also not available. Is there a way out of such a stalemate? And here the answer is also positive: yes.

How to connect an iPhone to a computer as a USB flash drive?

For this, a free application USB Drive for the iPhone was created. The very idea of ​​​​the developer of this program is that the PC does not recognize the device as a digital camera, but sees it simply as a USB flash drive.

It should be noted that there is a problem here. The fact is that the iPhone was originally used for synchronization or for downloading media materials. Therefore, the USB driver conflicts with these functions. We should pay tribute to the developers, they solved the problem quite simply: they introduced three separate modes of the gadget.

Program modes

Default - the mode in which devices are synchronized and photos and videos are transferred. When this feature is enabled, the computer will not sees iPhone as a flash drive.

DriveiTunes. On devices with Mac OS, it is possible to synchronize and use an iOS device as a storage medium. Operating room Windows system flash drive is not working.

drive-only – any operating system recognizes only a flash drive and nothing else.

Before use iPhone like a flash drive, you need to create a virtual disk - a special partition that will be reserved for space for information. When the device is connected to a PC, only this section and its contents will be visible. It is also important that after this procedure it will be possible to use an iPhone as a USB flash drive on any device without additional drivers.

Application nuances

When creating a virtual disk, you need to specify the required size and come up with a name for it.

After that, you will have to wait a while while formatting takes place. Those who have already done such an operation say that it takes quite a lot of time to create such a folder.

The big minus of the program is the fact that before switching modes, the device needs to be rebooted every time.

The following point is also important: if you installed the USB Drive for the iPhone program, and then decided to delete it, then you can delete it only when the Default mode is enabled. Otherwise, the iPhone may behave unpredictably or even break.

Connect iPhone to PC without USB cable

Naturally, the question may arise whether it is possible to move information without a cord. In other words, how to connect an iPhone to a computer without USB? For owners of the fifth model, there is another way to transfer data from their "apple" to a PC. You can do this using a wireless network.

The algorithm for connecting an iOS device to Wi-Fi is described below.

For such a connection you will need:

  • iPhone;
  • Personal Computer;
  • router (router) of the wireless network.

First of all, you need to activate the Wi-Fi module in the device.

Then, in the settings, select the found wireless network that the router issues.

After that, the connection should take place.

Sometimes a situation arises when a computer does not see the connected iPhone over the wireless network.

There may be several explanations for this. Without delving into all the nuances of such reasons, we will try to correct this situation.

  1. Synchronize devices using a USB cable.
  2. Go to the "iTunes" section, find the "Devices" folder and select the desired gadget model.
  3. Open the "Overview" section and select the "Options" folder.
  4. In this section, you need to select "Synchronization".
  5. After that, disconnect the wire from the PC.

Everything, now you can connect devices using a wireless network.

On the Internet, many users ask the question why the computer does not see the iPhone via usb and they cannot synchronize their smartphones. A significant knowledge base has been accumulated over the years to help make iPhone, iPad, and iPod touch devices compatible with Windows 8, 7, Vista, Windows XP, and Windows 10 computers. Below is a description of how to solve the problem.

We explain why the computer does not see the iPhone via usb and how to fix it

First steps

You need to start with the most simple steps before looking for the deeper sources of the problem:


If the computer still does not see the iPhone

iPhone drivers and Windows computers

Windows computers need iOS system drivers to correctly recognize iPhone, iPad, and iPod touch devices. If the device is not recognized, the drivers may not be installed, may be out of date, or may not be configured correctly. Drivers are installed using the iTunes media player, but there are other methods for installing them.

Many people find iTunes cumbersome and inconvenient. Therefore, there is a tool for installing iOS drivers on a computer without iTunes, which helps to recognize the iPhone in a few minutes. CopyTrans Drivers Installer installs the drivers automatically.

Installing, updating or restoring iOS drivers through iTunes

If iTunes is not on the computer, the computer will not recognize the iPhone correctly as a camera. When connecting an iPhone, access is only to the camera gallery. You can't see, sync, or back up music, messages, videos, or other device content.

To get iOS drivers from iTunes, download them from the link.

The version of iTunes may be outdated and may not support iPhone. Update iTunes by going to Help > Check for Updates.

iTunes is installed and updated, but the iPhone does not recognize:

  1. completely remove iTunes and its components from the computer (the contents of the library will not be deleted);
  2. restart your computer;
  3. reinstall iTunes;
  4. check your iPhone connection.

If problems remain

iTunes is installed, but the iPhone does not recognize

Check the operation of the Apple Mobile Device Service:


Second, make sure the Apple Mobile Device USB Driver is installed and active:

If you see the "!" next to the Apple Mobile Device USB Driver building, right-click on the line and click "Enable".

If you see the "?" next to the line Apple Mobile Device USB Driver, right-click on the line and click "Uninstall".


It is possible to find out the reasons why the computer does not see the iPhone via usb and you can fix it using another method. We would love it if you tell us about it in the comments below.

As a rule, the vast majority of users use the iTunes program to pair an Apple device with a computer. In this article, we will try to answer the question of what to do if iTunes does not see the iPhone.

Today we will look at the main reasons why iTunes does not see your device. By following these recommendations, you will most likely be able to solve the problem.

Reason 1: Damaged or non-original USB cable

The most common problem that occurs due to the use of a non-original, even if certified by Apple, cable, or an original one, but with existing damage.

If you are in doubt about the quality of your cable, replace it with the original cable without a hint of damage.

Reason 2: Devices don't trust each other

In order for you to manage an Apple device from a computer, trust must be established between the computer and the gadget.

To do this, after connecting the gadget to the computer, be sure to unlock it by entering a password. A message will appear on the device screen. "Trust this computer?" with which you must agree.

The same is true with the computer. A message will appear on the iTunes screen asking you to confirm the trust between devices.

Reason 3: Incorrect operation of a computer or gadget

In this case, we suggest that you restart your computer and apple device. Once both devices have booted up, try connecting them again using the USB cable and iTunes.

Reason 4: iTunes crash

If you are completely sure that the cable is working, then the problem may be in the iTunes program itself, which does not work correctly.

In this case, you will need to completely remove iTunes from your computer, as well as other Apple products installed on your computer.

Once you have completed the uninstallation of iTunes, restart your computer. After that, you can proceed to install the new version of iTunes, after downloading the latest distribution of the program from the official website of the developer.

Reason 5: Apple device malfunction

As a rule, a similar problem occurs on devices that have previously been jailbroken.

In this case, you can try to enter the device into DFU mode, and then try to restore it to its original state.

To do this, completely turn off the device, and then connect it to the computer using a USB cable. Launch iTunes.

Now you need to enter the device into DFU mode. To do this, hold down the power button on the device for 3 seconds, then, without releasing the button, hold down the Home button as well, holding both keys for 10 seconds. Finally, release the power button while continuing to hold "Home" until the device is detected by iTunes (on average, this happens after 30 seconds).

If the device is detected by iTunes, start the restore procedure by clicking on the appropriate button.

Reason 6: Other device conflict

iTunes may not see the connected Apple gadget due to other devices connected to the computer.

Try disconnecting all USB devices connected to your computer (except for a mouse and keyboard), and then try again to sync your iPhone, iPod, or iPad with iTunes.

If none of the methods helped you fix the problem with the visibility of the Apple device in iTunes, try connecting the gadget to another computer that also has iTunes installed. If this method is not successful, contact Apple Support.

If, when connecting the gadget to a PC to synchronize with iTunes an error occurs, this is not a reason to panic and suspect that the iPhone is broken. Possible reasons there are a huge number of errors: it can be caused by incorrect firmware or the unwillingness of the computer's security software to allow the connection of Apple equipment. It is important to pay attention to the error code: the numbers can tell not only the reason why the PC does not see the iPhone, but also a way to solve the problem.

Why iPhone won't connect to computer: iTunes connection errors

All errors that occur when connecting an Apple smartphone to iTunes can be classified into the following types:

  • Errors due to communication problems.
  • Errors caused by conflict with anti-virus software (firewall, firewall).
  • Problems that arose due to incorrect USB connection of the gadget.

Let's look at each type of error in more detail.

Network errors

This type of problem is usually caused by the computer being unable to connect to the Apple update server or device.

Network error numbers: 17, 1403, 1004, 1013, 1014, 1015, 3200, 3004 .

Communication problems are accompanied by messages like " An error occurred while downloading the software" and " An unknown error has occurred».

Solve network problems on one's own not easy, and sometimes completely impossible - often you just have to wait until the update server returns to correct operation. However, you can still try to fix some errors yourself - for example, these:

  • 1403. This code indicates that a corrupted firmware is being used to restore the iPhone. Download another file or download the same one, but through a different download manager.
  • 1013-1015. Similar errors appear if the user tries to transfer his iPhone to an older version of the OS, because the new one seems inconvenient to him. Apple allows you to "rollback" to the previous version of the OS only within 2 weeks after the release of the new one- this period is given to the user to familiarize himself with the capabilities of the current software. Otherwise, revert to an older version Apple-approved paths prohibited.
  • 17. An error occurs if the owner of the iPhone tries to transfer his gadget with one custom ( modified by the user) firmware to another. This operation must be performed after entering the smartphone into DFU mode - then there will be no problems. Details about the DFU mode are described.
  • 3004 , 3200. The user runs the risk of encountering these errors if he decides to update his smartphone in the first days after the release of the update. The problem lies in the prohibitive workload of Apple servers. Of course, an ordinary owner of Apple technology cannot solve such a problem - it remains to wait until the hype subsides.

Problems with security software

If you regularly encounter the fact that the iPhone does not connect to the computer due to a block of security software, you should think about installing another antivirus, because how to synchronize the gadget c iTunes will have to constantly. You can deactivate protection every time you connect your iPhone, but in this case there is a high risk that later you will simply forget to turn on the antivirus.

Another alternative solution is to switch to another program for downloading media files (for example, to iTools), but, most likely, when using similar software, the antivirus will also “swear”.

To understand that the problem lies precisely in the security software, you can by the error numbers. Faults of this type are assigned numbers9006, 9807, 11222, 13014, -39 and so on.

The appearance of one of these codes on the screen indicates a blocking of any operation. For example, on error 9807 certificate verification is blocked, and in case of an error

Image: cydiarepo.com

Separately, it is necessary to mention a problem with the code ( -39) - it appears if the iPhone cannot download music purchased from iTunes Store. The cause of this error can be not only an antivirus - it is likely that an outdated version is loaded on the PC iTunes. Before changing security software, update iTunes, go to the store again and try downloading again.

USB connection problems

The error number makes it clear which component of the connection is causing the failure.

Errors related to incorrect USB connection have the following codes: 13, 14, 1601-1609, 2001-2011, 4005, 4013 (etc.).

Image: drfone.wondershare.com

The fact that the problem lies precisely in the connection can be judged by the following messages in the error window:

  • « An unknown error occurred during synchronization».
  • « iPhone timed out waiting for a response».
  • « The device can run faster».

Image: andyrathbone.com

Let's take a look at how to troubleshoot the most common problems:

Mistakes 13, 14. The USB cable may need to be replaced. Such errors often appear when a user tries to connect an iPhone to a laptop with a low-quality Chinese cable. Please note that the reason may be different: for example, 13 The -th error also appears when you try to install the iOS beta from a Windows environment, and 14 th - due to a software conflict with an antivirus. Therefore, before you go to the communication salon for a new cable, try other, less expensive ways to solve the problem.

When an error occurs 13 (it's quite common) Disable USB 2.0 support as a first step. You can do it like this:

Step 1. Right click on the " A computer” and in the menu that appears, select the item “ Properties».

Step 2. In the menu section " System» select « Device Manager».

Step 3. AT " dispatcher» find the block « USB controllers' and select ' USB 2.0 hub". Right-click on this item and click " Disable».

Bugs 1601-1609. If the iPhone stops connecting and shows a similar error, most likely it will be enough to change the USB port on the computer to avoid these errors. However, other measures may be needed: updating or reinstalling iTunes, file check hosts, linking a domain to a specific IP address for records of an undesirable form.

Since the file check hosts- a procedure unfamiliar to ordinary users of Apple technology, it is worth describing in detail how it is carried out:

Step 1. On Windows 7 and 8 the file is located in the folder WINDOWSsystem32driversetc- go to this address and you will see the following:

Step 2. Open file hosts(very first) in notepad:

Step 4. Pay attention to the last two lines - for PCs with Windows 7 and 8 they should be:

  • "127.0.0.1localhost"
  • "::1 localhost".

On Windows XP, only the first of 2 lines is present in the hosts file.

If you notice that at least one punctuation mark is missing, correct it immediately. Incorrect file hosts one of the most common reasons why USB ports PCs are malfunctioning.

Bugs 2001-2011. The reasons that the computer does not see the iPhone are malfunctions of the USB cable and port. For example, error 2003 says that it's time to clean the port and check the contacts. Error 2005 poses the greatest threat to the user's wallet: if such a problem occurs, definitely you will have to buy a new cable (preferably the original one).

Errors 4005, 4013. These errors appear during the device recovery procedure or after an update. To avoid them, you need to repeat the recovery attempt using a different cable and first entering the iPhone into the DFU.

To avoid problems with USB connection, it is recommended to follow some general tips:

  • Before connecting, remove all additional batteries, covers, bumpers from the gadget.
  • Connect Lightning or 30-Pin directly to a PC port, not to a splitter or keyboard.
  • To connect your smartphone to a PC, use only original cables or accessories that were produced by companies approved Apple (eg. Belkin).

How to fix error 0xE8000003?

Error 0xE8000003(or 0xE800000a) is one of the most common; surely every iPhone user has encountered it at least once when trying to connect the device to a computer. An error with this code indicates that the contents of the Lockdown directory are corrupted.

Folder lockdown is generated the first time an iOS device is connected to a computer - you can find it on Windows 7, 8, 10 at the following disk address: ProgramDataAppleLockdown.


The directory contains files with the .plist extension, which provide access to information located on the i-Gadget. If these files are corrupted, you will not be able to sync with iTunes.

Correct mistake 0xE8000003 can be done as follows:

Step 1. Go to the above disk address - you will see in the folder lockdown plist files.

Step 2. Send the contents of the catalog to the "Basket".

Step 3. Connect iPhone to PC and launch iTunes.

Step 4 A message will appear, through which iTunes will request access to information - click " Proceed».

Step 5. Confirm that you are giving access to data on the device itself.

After that in the folder lockdown files plist will be recreated.

If you are the owner of a Mac and have encountered such an error, proceed as follows:

Step 1. open Finder and select " Navigate to a folder».

Step 2. Type in the search field /var/db/lockdown and press " Input».

Step 3. In the window Finder files with long unreadable names will appear. The files need to be deleted - for this you will have to enter the administrator password.

Despite the advice of "experts" found on the Internet, do not completely delete the Lockdown folder from either a Mac or a Windows PC.

Step 4. Restart your computer. After the reboot, the iPhone connection procedure should go like clockwork.

Jailbroken iPhone: Common Issues

Jailbroken iPhone owners are forced to encounter errors with multi-digit codes much more often. The most common problems are:

  • 0xE8008001 . The user installs an unsigned (in other words, pirated) application on the smartphone. The problem is solved by downloading a fix called AppSync, which can be found in Cydia(repository - smolk.myrepospace.com).
  • 0xE800003D . The appearance of this code on the computer screen indicates that the "jailbroken" iPhone cannot access the carrier settings mobile communications. On error 0xE800003D should go to PC along the way /System/Library/CarrierBundle and send custom bundles (which are called Carrier Bundles).

Other errors when connecting iPhone to PC

iPhone users may encounter other problems that do not fall into any of the above categories and are not solved by the methods described:

  • (-9800); (-9808); (-9815) – iTunes does not allow you to transfer the purchased content to the device, because the purchase time is different from that set on the PC watch. It is enough just to change the time on the computer to the correct one, and the problem will be fixed.
  • 20000 . iTunes conflicts with the Windows GUI. Change the theme on the PC to the standard one - you will not encounter this error again.
  • 8248 . This error appears after updating. itunes, if media combine plugins that are incompatible with it new version, continue to operate. Go to " Dispatcher tasks» and stop the process memonitor.exe- most likely, this will be enough to fix the problem.
  • 414 . iTunes does not allow downloading content, because there is an age limit. You need to correct your date of birth Apple ID. Through iTunes you won’t be able to do this - you will have to go to the Apple ID management page and change the data in the “ password and safety».

Conclusion

Apple technology is rather capricious: there are an innumerable number of errors that can occur when connecting an iPhone to a PC. However, multi-valued error codes should not frighten users and mislead them about the complexity of the repair: most of the problems can be fixed with primitive measures (say, use a different USB port).

Those problems that the user is not able to cope with personally, no one can solve - say, if the error arose due to an overload on the Apple server, all that remains is to wait for the employees of the "apple" company to show promptness. Contacting a service to fix an error connecting an iPhone to a PC is a pointless measure - the owner of the gadget will only give money for the work that he himself could do in a couple of minutes.

After manipulating the iPhone firmware or its hardware, it is not uncommon for the iPhone not to see the network. There can be many reasons for this problem, but one of the most common is a failure in the current date and time zone settings. Today we will look at the main ways to solve this problem.

After flashing iOS or replacing the SIM card, it happens that the iPhone writes "no network". In place of the operator's logo is the inscription "No network". This situation immediately reduces the capabilities of the device and actually turns it into a player. Often, users carry the device to a service center, where they try to return the connection for an additional fee, although in most situations the problem when the network on the iPhone disappeared can be solved on your own.

The secret lies in the peculiarities of the work of iOS itself. iPhone does not catch the network if the time zone and date / time do not match the current indicators. Correcting the situation is very easy by simply connecting your smartphone to a Wi-Fi network and performing a series of simple manipulations.

Time correction to restore access to the cellular network

As you can see, the method is very simple and at the same time quite effective. However, you do need to be connected to a Wi-Fi network for the iPhone to register with Apple's server. Otherwise, cellular communication will not come to life.

What to do if there is no access point to a wireless network nearby?

In this case, the most simple solution will create a Wi-Fi network using another iPhone, which can connect to the mobile Internet and distribute the wireless network. To do this is quite simple:

After these manipulations, a new item will appear in the main settings menu - Modem mode. After activating it, the device will begin to "distribute" the Internet.

If this method is not available either (the inscription on the iphone "searching for a network" is saved), then all that remains is to restore the iOS firmware.

First you will have to download the firmware file, connect your smartphone to a computer with iTunes installed. In the app, select Restore.

It is important to remember that the recovery procedure will delete all personal data and settings from the mobile device.

If even after these manipulations the iPhone does not leave the network, then the problems may be related to the hardware of the device and you can’t do without going to the service center.