Anti-decubitus mattress armed tubular with compressor instruction. Anti-decubitus mattress Armed cellular
Anti-decubitus mattress Armed cellular Anti-decubitus mattress Armed tubular
PASSPORT
We are grateful to you for using the anti-decubitus mattress Armed - a mattress with a compressor (diamond-shaped cells, pipes).
Before using the anti-decubitus mattress Armed, please read the instructions carefully.
Note: please note that the use of this anti-decubitus mattress must be in full accordance with these instructions, otherwise the product may be damaged. Please carry out disinfection according to this instruction.
1. PURPOSE OF THE PRODUCT
Pressure ulcers are a serious problem for bedridden patients, especially those who cannot turn. Due to prolonged contact with the surface of the bed, the skin begins to become inflamed and this process develops. The ulcer causes severe pain to the patient in addition to the underlying disease, thus making patient care much more difficult. A standard anti-decubitus mattress has a protective function, not a restorative one. Their main purpose is to reduce the pressure of the body on the bed, not to treat bedsores.
Anti-decubitus system - a mattress with a compressor (diamond-shaped cells or tubes) consists of air cushions. They are inflated alternately, forming 2 groups A and B, and, accordingly, change the pressure points of the body.
2. STRUCTURE AND PARAMETERS
Completeness:
Description and technical characteristics: pump
Mattress:
4. MANUAL
Place the pump on a flat, hard surface or hang it over the foot rails of the bed using the hooks on the pump body. Spread the anti-decubitus mattress on the mattress of the bed, bending the free ends under it. The entrance for the connecting tubes must be located in the foot section of the bed. Connect the pump to the mattress with the connecting tubes. Make sure the tubes are not twisted and do not go under the mattress. Turn on the pump (position "ON"). Air will begin to flow into the mattress. Cover the mattress with a cotton sheet and lay the patient down. Adjust the pressure by selecting "MIN" or "MAX" accordingly, depending on the patient's weight and comfort. The best option is when two fingers pass between the patient's body and the uninflated part of the mattress. To turn on the static function, set button 5 to the “ON” position, while all cells inflate simultaneously, providing a static mattress surface. This allows you to easily change the position of the patient during procedures or feeding. When the static function is disabled, the system operates normally.
ATTENTION: PUMP OPERATION MODE 24/7.
5. TYPES OF FAULTS
Types of breakdowns | Problems | Repair Methods |
|
The mattress does not inflate | Indicator on | Tube disconnected | Attach her |
The mattress is pierced | Plug the hole |
||
Indicator off | Power not connected | Plug in the power |
|
Mattress not fully inflated | The mattress is very soft | Minimum pressure | Turn the dial to the right |
The mattress is cracking | Unroll it and wash it |
||
Air filter blocked due to long use | Blow it out |
||
The pump is noisy | Screws on the air pump are not tightened | Tighten them up |
6. CARE OF THE SYSTEM
Pump.
Check the air filter once a month. If dirty, wash the filter with a mild detergent, dry and reinstall.
Instructions for use
Armed mattress anti-decubitus cellular with compressor/201300006 instructions for use
Compound
PVC material
Anti-decubitus mattress - 1 pc.
Plastic tube - 2 pcs.
Control unit - 1 pc.
Spare parts kit:
PVC patch - 2 pcs.
Glue - 1 pc.
Passport - 1 copy.
Equipment
Anti-decubitus mattress - 1 pc.
Plastic tube - 2 pcs.
Control unit - 1 pc.
Spare parts kit:
PVC patch - 2 pcs.
Glue - 1 pc.
Passport - 1 copy.
The air pump panel has an indicator light and a pressure switch dial.
Description
Pressure ulcers are a serious problem for bedridden patients, especially those who cannot turn.
Due to prolonged contact with the surface of the bed, the skin begins to become inflamed and this process develops.
An ulcer causes severe pain to the patient in addition to the underlying disease, thus making patient care much more difficult.
A standard anti-decubitus mattress has a protective function, not a restorative one.
Their main purpose is to reduce the pressure of the body on the bed, not to treat pressure sores.
The mattress is an anti-decubitus system consisting of a mattress and a compressor.
The mattress is made of easily washable hypoallergenic material (polyvinyl chloride).
Air chambers in the form of honeycombs.
Variable pressure is created thanks to the pump, which delivers air through the tubes alternately, in a given rhythm, into the various cells of the mattress.
Adjustment of pressure depending on the weight of the patient.
The effect of continuous massage.
Simple and clear control system.
The compressor can be placed on the floor or on the side rail of the bed.
Works only when constantly connected to the mains.
Anti-decubitus system - a mattress with a compressor (diamond-shaped cells) consists of air cushions.
They are inflated alternately, forming 2 groups A and B, and, accordingly, change the pressure points of the body.
An effective cellular anti-decubitus mattress consists of air cells that are filled with air alternately in a checkerboard pattern.
Filling with air is carried out by means of an automatic, silent compressor, designed for continuous operation.
Anti-decubitus mattress provides a smooth change in pressure on the surface of the body of a lying patient.
The effect of continuous massage created by it normalizes blood circulation and prevents the appearance of bedsores.
Attention: this mattress is equipped with the "Static" mode.
The "Static" mode is a mode in anti-decubitus mattresses, in which all the cells of the mattress are filled with air.
This mode is designed to move the patient, or when feeding the patient and gives the patient additional stability.
SPECIFICATIONS:
Mattress size (in working condition), length x width (no more):
Cellular 2300 x 1000 mm
Control unit size (no more): 165x280x170 mm
Working pressure: 20 +/- 1 kPa
Work: continuous
Power Supply: AC 220V±10%, 50Hz
Power consumption, no more than 10VA
Fuse RT1-20, Ф5Х20
Selling Features
Without a license
Special conditions
Before using the anti-decubitus system, please read the instructions carefully.
Note: Please note that the use of this system must be fully
Follow these instructions, otherwise the product may be damaged. Please carry out disinfection according to this instruction.
The warranty period for anti-decubitus mattress Armed cellular is 12 months from the date of sale, subject to the requirements of this instruction.
Wear parts are not guaranteed.
Delivery to the service center and back is carried out at the expense of the client.
Indications
Pressure ulcers are a serious problem for bedridden patients, especially those who cannot turn. Due to prolonged contact with the surface of the bed, the skin begins to become inflamed and this process develops. The ulcer causes severe pain to the patient in addition to the underlying disease, thus making patient care much more difficult. A standard anti-decubitus mattress has a protective function, not a restorative one. Their main purpose is to reduce the pressure of the body on the bed, not to treat pressure sores.
Contraindications
Injuries of the spine and spinal cord;
Neck and skeletal traction.
Mode of application
Dosage
MANUAL1. Place the pump on a flat, hard surface or run it over the leg rails.
Tee using the hooks on the pump housing.
2. Spread the anti-decubitus mattress on the mattress of the bed, bending the free ends under it. Entrance
For connecting tubes must be located in the foot section of the bed.
3. Connect the pump to the mattress using the connecting tubes.
4. Make sure the tubes are not twisted and do not go under the mattress.
5. Turn on the pump (position "ON"). Air will begin to flow into the mattress.
6. Cover the mattress with a cotton sheet and lay the patient down.
7. Adjust the pressure by selecting "MIN" or "MAX" accordingly, depending on the weight of the patient
And comfort. The best option when between the patient's body and the uninflated part of the mattress
Pass two fingers.
8. To enable the static function, set button 5 to the “ON” position, while all cells
They inflate at the same time, providing a static mattress surface. This makes it easy
Change the position of the patient during procedures or feeding.
9. When the static function is turned off, the system works normally.
ATTENTION: THE PUMP OPERATION IS 24/7.
Anti-decubitus mattress Armed is a whole series of products from one well-known manufacturer. Let's get acquainted with the company Armed, the types of anti-decubitus mattresses manufactured by it, important advantages and individual significant characteristics.
The goal of the Armed company is to produce goods that are needed by sedentary and elderly people. The company has been doing this for 15 years. During all this time, a lot of effort has been directed towards acquiring practical knowledge about the care and supervision of this category of patients. Based on this approach, the company managed to assemble a voluminous technological base, which contains descriptions of different aspects of caring for the elderly. The company is ready to provide this database free of charge to any person interested in this kind of information.
The priority activity of the company Armed has chosen the production of several varieties of high quality anti-decubitus mattresses. Realizing what an important role this device plays in the life of sedentary patients, the Armed company has drawn on all its experience and invaluable knowledge, innovative technologies in order to develop a new Armed anti-decubitus mattress.
Anti-decubitus mattress Armed is designed and manufactured for those bedridden patients who are forced to spend a long time in bed. Using these devices, you can fight the formation of bedsores both in a hospital setting and within the walls of your home.
When using Armed anti-decubitus mattresses, the principle of operation of a unique system becomes clear, by means of which it is possible to change the places of support of the patient from time to time, resulting in an improvement in the function of blood flow. The anti-decubitus mattress is equipped with laser perforations, which are responsible for excellent airflow to the patient's body. This prevents sweating.
Varieties of products against the formation of bedsores
Today you can choose and purchase the necessary product by considering the following options:
Anti-decubitus mattress with compressor Armed. This type of bed sore mattress greatly alleviates the suffering of patients who experience severe pain throughout the body by reducing their intensity. It provides the ability to competently and effectively deal with pain.
The delivery set of the anti-decubitus device for mattresses of this type includes:
- power unit;
- electrical protection;
- pump;
- fuse;
- instructions for use.
These products are made from the highest quality rubberized fabric.
Mattresses against the development of bedsores TM Armed are functionality and durability at the same time. Therefore, they are widely used in many clinics, as well as at home. The mechanism of action of the bed sore mattress from Armed is contained in a universal system that provides for the use of this device for people with various health problems:
- in a coma;
- with a diagnosis of paralysis;
- with broken bones.
Also, the products are widely used in the postoperative period in patients who have recently undergone surgery.
All of the above in favor of TM Armed anti-decubitus products only confirms that the equipment of this company is multifunctional and has a democratic cost.
Cellular mattress against bedsores Armed. Anti-decubitus mattress of cellular type Armed is suitable for use in hospital wards, as well as in any room of a residential apartment or a private house. It does not make noise, in connection with which it does not disturb the rest of either the person lying on it or the neighbors who are nearby in the ward. And if a cellular mattress is used at home, then the household will also be very satisfied in this regard.
The instructions for use indicate the possibility of using this product for preventive and therapeutic purposes for patients with the first of 3 initial degrees of pressure sores. At a low price, such a product can eliminate many problems of immobilized people.
Tubular mattress against bedsores. Anti-decubitus Armed tubular is a rescue mattress for certain categories of patients. It provides for the possibility of a cyclical change of places of pressure on the bed under the weight of the human body. It is chosen when it comes to 3-5 degrees of bedsores. This product is designed to solve a number of problems:
- stops the progress of complications provoked by prolonged lying of the patient;
- treats bedsores;
- excludes the emergence of new ones.
Anti-decubitus mattress Armed with laser perforation. Such a device for combating bedsores is recommended for use in the most neglected situations.
In addition to laser perforation, the advantages of these products are additional airflow to create an optimal microclimate for the patient and a hole for the vessel.
Effectively disinfect and purify the air. They provide highly effective disinfection of the surrounding air from 95 to 99.9%. Absolutely safe for people and animals, it is possible to use the recirculator indoors in the presence of people. Easy to use does not require additional operating costs.
Recirculators are applied in rooms for air disinfection in order to reduce the level of bacteria and create conditions to prevent the spread of pathogens of infectious diseases.
Used indoors with an increased risk of the spread of infectious agents: in medical and preventive, preschool, school, industrial and public organizations and other premises with a large crowd of people, as well as in domestic premises in the presence and absence of people.
The principle of operation of the Armed recirculator- the process of air disinfection takes place directly in the body of the device - the internal fan drives along the lamp, cleaning takes place under the influence of ultraviolet rays, the protective glass transmits only visible radiation, that is, ordinary light.
In terms of electrical safety, ARMED irradiators-recirculators comply with the requirements of GOST 12.2.025.
Irradiator recirculator Armed
wall-mounted / mobile
the lineup
Single lamp recirculators
Dual lamp recirculators
Three-lamp recirculators
Five lamp recirculators
Manufacturer: "Zhejiang CH Lighting Co., Ltd", China
Medical irradiator-recirculator "Armed" СH111-115
Recirculator ARMED "CH111-115" it is intended for air disinfection of rooms of II-V categories with a volume of up to 30 cubic meters. in medical institutions in the presence and absence of people by means of disinfection of the air flow in the process of its forced circulation through the body, inside of which one germicidal lamp F15 T8 15W G13 is placed with a quartz resonator, the wavelength of the spectral line of the bactericidal flow is 253.7 nm, which has a bactericidal effect, does not form ozone. The irradiator - recirculator CH-111-115 is equipped with a counter of the hours worked (resource) of the lamps.
| Frame | chemical resistant plastic body color: white, blue, orange, green |
|
| Photos | ||
| Performance | not less than: 30 m3/hour | |
| no more: 1 min. | ||
| Germicidal lamp F15 T8 15W G13with quartz resonator | ||
| 253.7 nm | ||
| 3.5 W/m² | ||
| Noise level | no more than 40 decibels | |
| Average lamp life | 8000 hour | |
| 8000 hours to 0 | ||
| Power consumption | no more than 20 W | |
| 220/50 V/Hz | ||
| dimensions | 610x95x105 mm | 410×110×105 mm |
| Net weight | no more than 1kg | no more than 1.4 kg |
| Lifetime | at least 5 years | |
| Protection class | 1 | |
| Equipment |
Irradiator-recirculator 1 pc. |
|
| Colors | ||
| Price |
RUB 3,390.00(body color: blue, green, blue) |
RUB 3,690.00 |
ARMED "CH111-115"
Medical irradiator-recirculator "Armed" СH111-130
Recirculator ARMED "CH-111-130" it is intended for air disinfection of rooms of II-V categories with a volume of up to 30 cubic meters. in medical institutions in the presence and absence of people by disinfecting the air flow in the process of its forced circulation through the body, inside which there is one bactericidal lamp F30 T8 30W G13 with a quartz resonator is used in installations for the neutralization of bacteria, viruses and other protozoa for disinfection air, water and surfaces. The lamp emits short-wave ultraviolet rays with a maximum at a wavelength of 253.7 nm, which have a bactericidal effect, does not form ozone. The irradiator - recirculator CH-111-130 is equipped with a counter of the hours worked (resource) of the lamps.
| Frame | chemical resistant plastic, white | powder-coated metal |
| Photos | ||
| Performance | not less than: 30 m3/hour | |
| Start-up time | no more: 1 min. | |
| Source of ultraviolet radiation | with quartz resonator | |
| Noise level | no more than 40 decibels | |
| Average lamp life | 8000 hour | |
| UV lamp timer display range | 8000 hours to 0 | |
| Power consumption | 30 W | no more than 20 W |
| Mains voltage/frequency | 220/50 V/Hz | |
| dimensions | 1070x95x105 mm | 505×110×105mm |
| Net weight | no more than 1.6 kg | |
| Lifetime | at least 5 years | |
| Protection class | 1 | |
| Equipment |
Irradiator-recirculator 1 pc. |
|
| Colors | ||
| Price | RUB 3,690.00 | RUB 3,790.00 |
Buy stand for recirculator ARMED "CH111-130"
Medical irradiator-recirculator "Armed" СH211-115
Recirculator ARMED CH211-115 equipped with a forced air circulation system and two bactericidal lamps that allow disinfecting indoor air, starting from category I (sterile blocks, operating rooms, maternity wards). Germicidal lamp F15 T8 15W G13 with a quartz resonator for decontamination and destruction of bacteria, viruses and other microorganisms. The lamp emits short-wave ultraviolet rays with a maximum at a wavelength of 253.7 nm, which have a bactericidal effect, does not form ozone.
| Frame | powder-coated metal | |
| Photos | ||
| Functions | ||
| Performance | not less than: 60 m3/hour | |
| Start-up time | no more: 1 min. | |
| Source of ultraviolet radiation | 2 germicidal lamps F15 T8 15W G13with quartz resonator | |
| Wavelength of the spectral line of the bactericidal flux | 253.7 nm | |
| Bactericidal flow power | 3.5 W/m² | |
| Noise level | no more than 40 decibels | |
| Average lamp life | 8000 hour | |
| Power consumption | no more than 25 W | |
| Mains voltage/frequency | 220/50 V/Hz | |
| dimensions | 720×175×110 mm | 710×175×110 mm |
| Net weight | no more than 3.5 kg | |
| Lifetime | at least 5 years | |
| Protection class | 1 | |
| Equipment |
Irradiator-recirculator 1 pc. |
|
| Price | RUB 3,690.00 | RUB 4,490.00 |
Attention! The stand for the recirculator is supplied separately and is not included in the price of the irradiator-recirculator. Buy stand for recirculator ARMED "CH211-115"
Medical irradiator-recirculator "Armed" СH211-130
Recirculators ARMED СH211-130 equipped with a forced air circulation system and 2 bactericidal lamps that allow disinfecting indoor air, starting from category I (sterile blocks, operating rooms, maternity wards).
| Frame | chemical resistant plastic and polycarbonate, white | powder-coated metal |
| Photos | ||
| Functions | equipped with a TIMER for the current operating time (on time) | |
| Performance | 90 m3/hour | |
| Start-up time | no more: 1 min. | |
| Source of ultraviolet radiation | Germicidal lamp F30 T8 30W G13with quartz resonator | |
| Noise level | no more than 40 decibels | |
| Average lamp life | 8000 hour | |
| Power consumption | no more than 30 W | |
| Mains voltage/frequency | 220/50 V/Hz | |
| dimensions | 1170×175×110mm | 1170×175×110mm |
| Net weight | no more than 4.5 kg | |
| Lifetime | at least 5 years | |
| Protection class | 1 | |
| Equipment |
Irradiator-recirculator 1 pc. |
|
| Price | RUB 4,190.00 | RUB 5,390.00 |
Attention! The stand for the recirculator is supplied separately and is not included in the price of the irradiator-recirculator. Buy stand for recirculator ARMED "CH211-130"
Irradiator-recirculator medical "Armed" CH311-115
Irradiator-recirculator medical "Armed" CH311-115, metal case equipped with a forced air circulation system consisting of three fans. The source of ultraviolet radiation is three ozone-free germicidal lamps of the F15T8 type with a wavelength of 253.7 nm. UV radiation with the specified wavelength has a pronounced bactericidal effect on microorganisms, including bacteria, viruses, fungi and spores.
The air inlet filter protects the interior and the lamps from dust that can enter with the air flow from the room.
Achieved by screen light isolation. The inner surface of the irradiator is covered with aluminum with a reflection coefficient of at least 86%.
Equipped with a TIMER of the current operating time and a COUNTER of the hours worked (resource) of the lamps allows timely replacement of lamps. The maximum lamp life is 9000 hours. 
Metal case
Specifications:
Dimensions: 825×320×130 mm;
Power consumption: 55 W;
Productivity: 100 m3/hour;
Noise level: 40 dB;
Protection class: 1;
Equipment:
UV-bactericidal three-lamp recirculator - 1 pc.
Germicidal lamp F15 T8 - 3 pcs.
Wall mounting kit - 1 pc.
Passport - 1 pc.
Note:Buy stand for recirculator ARMED "CH311-115" .
Irradiator-recirculator medical "Armed" CH311-115, price: 8,990.00 rubles.
Irradiator-recirculator medical "Armed" CH511-115
Recirculator-irradiator medical "Armed" CH511-115(metal case) - designed for air disinfection in medical institutions in the presence of people. Effectively works in rooms of any category with a volume of up to 100 cubic meters, prevents an increase in the level of air infection. Recirculators-irradiators CH511 are equipped with a forced air circulation system, consisting of 3 fans. The source of ultraviolet radiation is five ozone-free germicidal lamps of the F15T8 type with a wavelength of 253.7 nm. UV radiation with the specified wavelength has a pronounced bactericidal effect on microorganisms, including bacteria, viruses, fungi and spores. 
Features of this model: absolute safety when used in the presence of people high efficiency of air disinfection of 95-99.9% presence of a timer for the hours worked lamps the ability to work continuously quiet
It is used for air disinfection in rooms with a high level of sterility, such as operating rooms, surgical and intensive care units, maternity hospitals.
Equipped with inlet filter, the air inlet filter protects the interior and the lamps from dust that can enter with the air flow from the room.
UV protection is achieved due to screen light insulation, the inner surface of the irradiator is covered with aluminum with a reflection coefficient of at least 86%.
Equipped with a TIMER of the current operating time and a COUNTER of the hours worked (resource) of the lamps allows you to replace the lamps in time, the maximum lamp life is 9000 hours.
Operating time of the irradiator - recirculator depends on the volume and category of the room and can be at least 8 hours.
Metal case resistant to disinfectants.
Specifications:
Dimensions: 825×320×130 mm;
Power consumption: no more than 60 W;
Productivity: 100±10 m3/hour;
Rec. room volume: up to 100 m3;
Noise level: 40 dB;
Protection class: 1;
Potential risk class: 2a;
Equipment:
Irradiator-recirculator - 1 pc.
Wall mounting kit - 1 pc.
Coarse air filter - 8 pcs.
Passport - 1 copy.
Note: as standard, the irradiator recirculator Armed CH511-115 is supplied with a wall mount, for mobile use Buy a stand for the recirculator ARMED "CH511-115"
Irradiator-recirculator medical "Armed" CH511-115, price: 9,900.00 rubles.
With this product also buy: