5 to 6 country frame house.

Each 5x5 frame house, the project of which is presented on the Gradodel website, has an interesting design, functionality and excellent performance. The presence of an attic floor makes the house quite roomy, even with a small size. The appearance can be made original and attractive through the use of elements such as a small veranda or porch.

The construction of buildings is carried out using modern technologies and has the following features:

  • the supporting structure is made of high quality and environmentally friendly wood, safe for human health;
  • the use of high-quality insulation allows you to achieve high thermal insulation characteristics with a minimum wall thickness;
  • the small mass of the structure makes it possible not to make the foundation too deep;
  • the product is treated with special protective compounds that increase resistance to fungus, mold and moisture;
  • the inner surface of the house does not require expensive finishing.

The construction of turnkey frame buildings is carried out with the obligatory input of communications into the house, which is very convenient for the customer. The work is carried out by professional craftsmen who know the technology perfectly.

Advantages of building a 5x5 house

The low price of a 5x5 frame house is one of the advantages of construction. Compared with analogues made of brick or wood, the construction of a building of this type is much more profitable. In addition to an affordable price, the building has the following advantages:

  • minimum construction time of several weeks;
  • compact dimensions with high functionality and suitability for year-round use;
  • environmental friendliness and safety for human health;
  • the ability to choose one of several standard projects presented on the site;
  • construction according to individual sizes;
  • excellent heat and sound insulation characteristics of the finished building.

Booking a house with us is quite simple. It is necessary to fill out an online application or contact the managers by phone. Employees of the company "Gradodel" will tell you about the features of the houses of our production and help you choose the desired design.

If necessary, we will make changes to the project or develop an individual building, which has no analogues. Cooperation with the company allows the customer to get the finished building in the shortest possible time, saving significant funds. The quality, reliability and durability of structures is beyond doubt.

Foundation
Column supports 40x40x40cm free of charge (in the absence of a foundation on the site)

strapping
The lower trim is carried out with a trimmed beam with a section of 100x150mm

Walls and partitions
The frame of the outer walls is made of edged board 50x150mm (thickness 150mm), the frame of internal partitions is made of edged board 50x100mm (thickness 100mm), the lower and upper trim of the partition frame is made of edged board 50x100m. The frame of the walls and partitions is sheathed with clapboard of class "B" on both sides. The outer walls are insulated with glass-staple fiber 150 mm thick, the insulation is laid on the outside with a wind-moisture protective vapor-permeable membrane, on the inside with a vapor barrier membrane. Insulation of internal partitions is not carried out. The internal height of the premises on the first floor is 2.5 m.

Floors and joists
The floors of the first floor are double: subfloor: edged board 18-20mm thick, finishing floors - floor planed grooved board 30-40mm.
The floor joists are made of edged boards with a section of 150x50mm, the beams are installed in increments of ~0.5m.
The floors are insulated with glass-staple fiber 50 mm thick;
The floors of the attic are laid over the interfloor beams of the floor of the house - a floor planed grooved board 30-40mm.

doors
Doors are installed in the house: entrance and interior doors - paneled DHF (pine): box size 2.1x0.9m - 4 pcs. (paneled doors are not supplied with handles for opening and locks).

Window
The house is equipped with double-glazed wooden windows OS GOST, glazed window blocks of incomplete factory readiness (window blocks are not antiseptic and not treated with protective compounds, glass is installed without the use of putty, there are no sealing gaskets on the sashes and porches) 1.2x1.2m in size - 4 pieces, size 0.6x0.6m - 1 pc.

Stairs
A staircase is installed inside the house, the main elements of which (steps, stringers, bowstrings) are made of wooden furniture panels. Useful width of stairs ~ 830mm. The stairs are assembled on self-tapping screws using metal corners for fastening winder steps and other structural elements. The plan of the stairs indicated in the drawings indicates only its location and direction of ascent, but does not reflect the detailed design of the stairs, the actual number and shape of the steps.

Finishing
Horizontal and vertical corners of the interior are trimmed with plinth.
Galvanized iron sills are installed above the windows. Window and door openings are trimmed on both sides with a platband.
Temporary wooden steps are installed to enter the house.

Roof
The shape of the roof of the house is a mansard gable (or broken) with frame gables. Roofing - galvanized corrugated sheets. The roof kit includes: roofing corrugated sheets, ridge elements, fasteners. A heater is laid under the ridge to prevent snow from blowing.

Construction work included in the price
All partitions, windows, doors are placed in accordance with your individual project

Construction frame house 6x6 with a terrace in two hands - it is quite feasible. Especially if before that you study the experience of your predecessors in order to borrow valuable information regarding the materials, technologies and techniques used. To this end, let's turn to the experience of the GrauRu forum member, who almost single-handedly built such a house. Due to the lack of labor costs, the cost of such a house is less than a million rubles.

  • prefabricated;
  • low cost;
  • ease of construction;
  • environmental friendliness;
  • good "warm-up" and the ability to retain heat;
  • design flexibility.

Based on size building material(pine boards), the dimensions of the building were determined: it should be a 6x6 frame house with a terrace. The layout of the first floor included three rooms. Instead of the second floor - attic.



After determining the snow load (240 kg / m2) and the weight of the roof (40 kg / m2), a quality board 50x200 was chosen for the rafters. Since the ridge was not provided, the legs were knocked together in pairs into a triangle and connected with a nail plate on one side, and on the other with a plywood triangle. The width of the reference cut was determined by a measuring board, the length of which was equal to the width of the overlap. To add rigidity, each pair of rafters was additionally fixed with a coupler at a level of 2.5 m from the floor and a special jumper at an angle of 30 degrees. From the inside, the rafters received additional insurance in the form of a metal tape attached to the logs and stretched diagonally in a cross. To facilitate the lifting of the structure, a cord was used.





Under the excessive roof overhangs, a “ladder” had to be hammered together, since the removal of the beams was not thought out. The pediment with a step of 40 cm corresponded to the location of the pillars on the roof.

The large roof created significant windage, so for insurance it was necessary to skip the metal tape from the rafters along the racks to the strapping before installing the OSB boards. This was not done, the rafters had to be attached to the racks from the inside. I did the same with the lags, which I fixed with a harness. It is better to use metal perforated tape.

The canopy for the veranda and the roof of the house formed a single whole. Pillars and beams are made of timber 100x150. The step between the pillars is 2 m, the beam had a protrusion of 60 cm to form the roof overhang. To prevent the structure from walking, window corners 37x37 were used to stiffen it.

The time spent on the installation of rafters is 10 man-days.





wall cladding

Sheathing of the 6x6 frame house was carried out with OSB slabs 2.8 m manufactured by Egger, and fastening was carried out with 60 mm screw nails, which were driven in at 15 cm increments along the perimeter and 30 cm along the middle post. The position of the rack on the sheet was noted before the moment of installation. The binding was closed with a sheet using a 25 cm guide board.

The joints of the plates should be nailed apart, and the nails should be directed at a slight angle.

Labor costs - 3 man-days.



Roof covering and platform decking

Before laying the roof, a layer of vapor barrier was laid on the rafters - a Tyvek membrane film, and on top of it - a crate. As a material, they chose puretan metal tiles with a slightly thicker galvanization and a durable coating compared to others. During the laying of the tiles, ventilation ducts were made for the bathroom and the room, as well as a stove outlet.

25mm OSB with 4-sided tongue and groove was chosen as the decking. Installation took 1 day.




Warming

Insulation was chosen based on the optimal price-quality ratio. Most of all, Rockwool Light Butts Scandic (60x80 cm), Scandic XL (60x120 cm) for interiors and Technolight for exterior insulation met this criterion. The thickness of the slabs was chosen to be 100 and 50 mm in order to close all the openings in the walls and ceilings as much as possible. The most suitable step between the frame elements for laying Rockwool is 57-58 cm. Plywood sheets were used to keep the insulation in the ceiling opening. The crate for external insulation was made with a step of 59 cm. After laying Technolight, a Tyvek membrane was stretched over it. Styrofoam was used to insulate the windows.




At first, they planned to make heated rooms only on the first floor, the second was not considered as a living space. Heated with electric convectors - cold kitchen and veranda (part-time - entrance hall).
On the second floor, we thought we would make an attic for summer holidays, but then everything changed, already in the process of work.
As a result, now we are making the second floor with the possibility of living in the winter.

I must say right away that a bathroom in the house is not planned, winter plumbing too. Of all the amenities - the possibility of draining water from the kitchen sink into a pit on the street in the summer. The task was set of the cheapest, but high-quality construction with a minimum of non-residential premises and a maximum of living space. Therefore, the size of the building was chosen small - 5x6 m.

The foundation is tape, with one central lintel. Ribbon width - 25cm. The laying depth is about 40 cm. At this depth, the fertile layer ended and loam began. The formwork boards are knocked together from a 150x50 edged board, which in the future, after the formwork is removed and the boards are dismantled, will be used in the frame structure. From the inside, the formwork is sheathed with glassine, using a stapler. The upper edge of the formwork is set strictly according to the level, which allows pouring concrete to the brim and immediately, without grouts and plasters, leveling the foundation surface. Armature - 12mm. Two bars on the bottom edge and two on the top. The concrete was mixed on site. Crushed granite (6 tons), sand (4 tons), cement (30 mesh), water, concrete mixer for 140 liters, four Tajiks, one day of work. Unfortunately, there are no photos.

Three layers of roofing material are laid on top of the foundation and on them, strictly along the outer edge of the tape, an antiseptic board of the lower strapping 50 * 150. The binding is made only around the perimeter.

I must say right away that all the main frame boards are edged, unplaned. Only the lower trim and floor beams were smeared with an antiseptic.

The floor beams of the first floor - boards 150x50, naturally placed on the edge, rest with their ends (with pre-cut grooves) on the foundation and strapping. And in the middle - only on the foundation. Thus, the distance between the supports of the beams is about 2.5 m, which is enough, with a step of 0.55 m, to create a solid floor.

The next step was to install racks, pre-sawn in one size.

All boards are fastened together with nails (non-galvanized) 120 mm.

Then, with temporary jibs, according to the level, corner drains are attached. Similarly to the boards of the lower trim (in the same size), the boards of the upper trim are cut, lifted and fastened with nails to the corner posts. On the boards of the upper trim, even before they are lifted, the position of the racks is marked. Actually, both the upper and lower trims can be pre-cut and marked during preparatory work, since they must copy (in our case) each other.

The pitch of the racks is selected according to the size of the insulation. In our case, this is 56 cm, since PSBS sheets are used, 1x2 meters in size, cut along the middle.

Racks to the strapping are attached only with nails.

Below - two nails 120 mm each, hammered at an angle of 45 degrees, from opposite sides of the racks. Corner posts are additionally fixed with metal corners.

From above - two nails are hammered into the end of the racks through the top trim board.